Baker Oil Tools
TYPICAL BOTTOMHOLE ASSEMBLIES (BHA)STANDARD BHA
When running a BHA on coiled tubing, a standard string of main tools is required to deploy the lower BHA. Baker Oil Tools offers in-dustry leading technology components for this purpose. This string typically consists of a Coiled Tubing Connector, a Dual Back Pres-sure Valve, a Hydraulic Disconnect and a Circulating Valve (espe-cially in downhole motor operations). The Coiled Tubing Connector is used to provide a connection to the end of the coiled tubing. The MOTORHEAD ASSEMBLY
The Baker Oil Tools Motorhead Assembly combines the main tool components used in coiled tubing (CT) operations in modular form. The combined tool length has been greatly reduced, in comparison with the standard BHA, to allow ease of handling and deployment and also to effectively reduce the bending stresses in the BHA. The Motorhead assembly consists of the Coiled Tubing Connector, Dual Back Pressure Valve, Hydraulic Disconnect, Dual Circulation Dual Back Pressure Valve provides a double isolation barrier to prevent well fluids from entering the coiled tubing, particularly in the case of rupture of the coiled tubing at surface. The disconnect, typ-ically ball operated, is used as a release mechanism when the BHA below the disconnect gets stuck. A Dual Acting Circulating Valve, typically run in conjunction with a downhole motor, is used to create communication between the coiled tubing and the annulus to in-crease flow-rate once motor operations have been completed.
COILED TUBING CONNECTOR(Refer to page 119)DUAL BACK PRESSURE VALVE(Refer to page 120)UNIVERSAL HYDRAULIC DISCONNECT(Refer to page 121)DUAL ACTUATED CIRCULATING VALVE(Refer to page 126)Standard Bottomhole AssemblyRev., September, 2002
Sub, and optional Lockable Swivel.
MOTORHEAD ASSEMBLY(Refer to page 118)Motorhead Bottomhole AssemblyPRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING 117
Baker Oil Tools
Motorhead AssemblyProduct Family No. H13203
COILED TUBING STANDARD TOOLS
MOTORHEAD ASSEMBLYtor, dual back pressure valve, hydrau-Product Family No. H13203lic disconnect, dual circulation sub, and optional lockable swivel.DESCRIPTION/APPLICATIONThe Motorhead Assembly combines FEATURES/BENEFITSthe main tool components used in CT •High tensile strengthoperations in modular form. The com-•Full torque through capabilitiesbined tool length has been greatly re-•Shorter overall lengthduced to allow ease of handling and •Full internal pressure integritydeployment in the well and also to ef-•Standardized connections for ease fectively reduce the bending stresses of usein the BHA. The Motorhead Assembly consists of the coiled tubing connec-SPECIFICATION GUIDEToolMin ID ODCirculating SubDisconnect Standard in.mmin.mmin.mmConnection1.6942.90.4411.20.5614.11.6942.90.4411.20.5614.11\" AMMT2.1354.10.5614.10.6817.22.2557.20.5614.10.6817.21-1/2\" AMMT2.8873.20.6817.20.8120.42-3/8\" PAC DSI3.5088.91.1930.11.3133.32-7/8\" PAC DSIExternal Connector. Internal Connector.Minimum ID sizes specified are maximum piston ID's possible. Smaller ID configurations are available on request.Length varies with size and style of Motorhead Assembly utilized.Rev., September, 2002
118
COILED TUBING STANDARD TOOLS
COILED TUBING with set screws to rotationally lock CONNECTOR
them from spinning when used in con-junction with tools that create torque Product Family No. H13200
such as coiled tubing mud motors. DESCRIPTION/APPLICATION
The connectors utilize o-ring seals to seal off the coiled tubing in order to Coiled Tubing Connectors provide a maintain pressure integrity for the tool means of attaching a tool string to the string.
end of the coiled tubing. The connec-tors, when installed correctly, provide FEATURES/BENEFITS
a reliable strong sealed connection to •High tensile strength
the coiled tubing. All of the connectors •High torsional strength for motor have been designed with either a fish-applications
ing neck or a slick profile on the OD of the top sub. This will accommodate •Large ID for maximum flow rates standard external fishing overshots and pump through of actuation ballsshould the need arise. Coiled Tubing •Manufactured with fishing profile on Connectors have been designed for top of connector
most sizes of coiled tubing. The
•High pressure/high temperature Coiled Tubing Connectors are of the tools rated to 10,000 psi (689 bar) slip type or collet type design. The slip and 400°F (204°C)
type connectors are also equipped
SPECIFICATION GUIDE
Tool MinODID
Fishing NeckCoiled Standardin.mmin.mmin.mmTubing OD
Connection1.4436.60.6817.31.4436.63/4\" CS Hydril1.6942.90.7519.11.6942.91.8146.00.7519.11.811.00
1\" AMMT46.01\" AMMT2.1354.10.8822.41.3835.11-1/2\" AMMT1.6942.90.7519.11.6942.91\" AMMT1.81
46.0
0.7519.11.5038.11.25
1\" AMMT0.81
20.61.5038.11-1/4\" API Reg2.13
54.1
1-1/2\" AMMT0.7519.11.0025.41.8146.01\" AMMT1-1/2\" AMMT2.1955.60.6316.01.8146.01-1/4\" API Reg2.5063.51.0025.41.8146.01.50
1-1/2\" AMMT2.7569.91.0025.42.3158.72-3/8\" EU2.8873.21.1228.42.3158.72-3/8\" PAC DSI3.1379.51.0025.42.3158.72-3/8\" API Reg2.2557.21.0025.40.6316.02.0050.81-1/2\" AMMT1-1/4\" API Reg2.5063.51.0025.42.3158.71-1/2\" AMMT2.7569.91.0025.42.3158.72-3/8\" EU2.8873.21.5038.12.3158.71.75
2-3/8\" PAC DSI1.5038.12-3/8\" PAC DSI3.13
79.5
2.31
58.7
2-7/8\" PAC DSI1.0025.42-3/8\" API Reg2.5063.51.7845.21.0025.42.2560.52.375\" Hydril1-1/2\" AMMT2.6366.81.0025.42.6366.81-1/2\" AMMT2.8873.21.5038.12.6366.82-3/8\" PAC DSI3.0076.21.7544.52.7569.92.00
2-3/8\" EU 8 Rd1.0025.42-3/8\" API Reg3.1379.51.5038.12.7569.92-3/8\" PAC DSI2-7/8\" PAC DSI3.5088.91.5038.13.1379.52-7/8\" PAC DSI2.8873.21.5038.12.8873.22-3/8\" PAC DSI3.1379.51.9649.81.3935.33.1379.5
2-3/8\" EU 8 Rd1.0025.42.38
1.900\" CS Hydril3.3885.71.5038.13.1379.52-3/8\" API Reg2-7/8\" PAC DSI4.75120.71.9649.83.1379.53-1/2\" API Reg4.50
114.3
2.95
74.9
4.50
114.3
3.50
3-1/2\" EU 8 Rd
Rev., September, 2002Rev., February, 2004
Baker Oil Tools
Coiled Tubing ConnectorProduct Family No. H13200
119
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
Dual Flapper Back Pressure ValveProduct Family No. H13204COILED TUBING STANDARD TOOLS
DUAL FLAPPER BACK the coiled tubing connector in CT op-PRESSURE VALVEerations and at the top of the BHA in snubbing operations. The Dual Flap-Product Family No. H13204per Back Pressure Valve is run as a DESCRIPTION/APPLICATIONwell control measure to prevent well-bore pressure from entering the work-The Dual Flapper Back Pressure string. No pipe manipulation or Valve is a flapper type valve that al-pressurization sequence is required lows flow down the tubing, but stops to operate the tool. flow coming back up the tubing. The Dual Flapper Back Pressure Valve FEATURES/BENEFITShas two flappers and flapper seals. •Dual valvesThe second flapper is redundant to •Field-proven bonded Nitrilethe first and can be run where redun-valve seatsdant seals are required. The flapper is designed so that a ball can be •Short lengthpumped through it at minimum fluid •Large IDflow rate.•High pressure/high temperature tools rated to 10,000 psi (689 bar) The Dual Flapper Back Pressure and 400°F (204°C)Valve is normally run directly below SPECIFICATION GUIDEToolToolODIDLengthStandardin.mmin.mmin.mmConnection1.4436.60.5614.219.75501.73/4\" CS Hydril1.6942.90.6917.518.13460.51\" AMMT1.8146.00.6917.518.13460.51\" AMMT2.1354.10.8120.616.44417.61-1/2\" AMMT18.07459.01-1/4\" API Reg2.5063.50.8120.616.94430.31-1/2\" AMMT2.8873.21.0025.423.32592.32-3/8\" PAC DSI3.0677.71.0025.418.75476.32-3/8\" EU 8 Rd3.1379.41.0025.418.94481.12-3/8\" PAC DSI18.82478.02-3/8\" API Reg3.5088.91.5038.119.50495.32-7/8\" PAC DSI3.7595.31.0025.433.00838.22-7/8\" API RegRev., September, 2002Rev., February, 2004
120
COILED TUBING STANDARD TOOLSUNIVERSAL HYDRAULIC Internal debris management is con-DISCONNECT trolled by the use of o-rings and a de-bris filter at critical locations inside the Product Family No. H13209tool. A rupture disk has been incorpo-DESCRIPTION/APPLICATIONrated into the Universal Hydraulic Dis-connect to create a flow path should The Universal Hydraulic Disconnect is the lower bottomhole assembly be-a ball-operated emergency release come plugged. The rupture disk can device designed to be run in a coil tub-be disabled when required.ing application to provide a method of separating from tools below the dis-After disconnecting, the remaining connect. This disconnect incorpo-bottom half of the Universal Hydraulic rates features to withstand all forces Disconnect and tools below can be encountered during fishing, milling fished with a standard Hydraulic GS™ and drilling operations. The Universal Spear. A torque-through option is Hydraulic Disconnect has a high available for the GS Spear should ro-shock load strength, high tensile tation through the BHA left in hole be strength, is rotationally locked, and desired. has a shorter length when compared to other hydraulic disconnects.FEATURES/BENEFITS•Able to withstand continuous heavy The Universal Hydraulic Disconnect is jarring and impacting loads applied ideal for all applications including use in up and down modesbelow hydraulic jars jarring up or •Increased tensile and torsion down, use with HIPP-TRIPPER® im-strength compared to other discon-pact tools, and with drilling and work-nectsover motors. The tool has a positive pressure drop indication when the •Incorporates a debris barrier to pro-shear screws have sheared. This also hibit debris and fine sands from allows for circulation after disconnect-entering the tooling. The Universal Disconnect incor-•Rotationally locked for downhole porates a unique adjusting ring motor applicationslocking feature, which is an advan-•Special fishing tools available with tage in situations where high vibration probe for transmitting torque after may occur. The tool is rotationally disconnecting.locked for use in downhole motor or •Positive pressure indication at sur-torque applications.face after disconnecting•Has flow through capability after dis-connectingSPECIFICATION GUIDETool SizeMin IDLengthStandardin.mmin.mmin.mmConnection1.3834.90.317.914.54369.33/4\" Hydril CS1.6942.90.5313.513.93353.81\" AMMT2.1354.10.6917.514.58370.31-1/2\" AMMT2.8873.20.8120.615.50393.72-3/8\" PAC DSI3.1379.41.0025.416.52419.62-7/8\" PAC DSI20.17512.32-3/8\" API Reg3.5088.91.2531.819.46494.22-7/8\" PAC DSI Minimum ID specified is maximum piston ID possible. Smaller piston ID are available on request.Rev., September, 2002
Baker Oil ToolsUniversal DisconnectProduct Family No. H13209121
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
Model FAU SafetyHydraulic DisconnectProduct Family No. H13211
COILED TUBING STANDARD TOOLS
MODEL FAU™ SAFETY connect to separate. When discon-HYDRAULIC DISCONNECTnected, an internal GS fishing profile is left looking up, and subsequent re-Product Family No. H13211trieving operations may continue with DESCRIPTION/APPLICATIONthe Hydraulic Releasing GS™ Spear (Product Family No. H13311).The FAU Safety Hydraulic Disconnect is specially designed for thru-tubing FEATURES/BENEFITSfishing operations, and is built to with-•Provides controlled method of dis-stand high tensile and torsion stress-connection from lower portion of es encountered in jarring and motor BHAapplications. The FAU Safety Hydrau-•Disconnected portion has internal lic Disconnect may be run anywhere GS profilein the string as long as the actuation ball can be circulated to it. Should it •Balanced to prevent accidental dis-become necessary to disconnect from connectthe tool string, a ball is circulated to •Torsionally lockedthe releasing piston, additional pump •Large ID permits circulation of pressure will shear the screws, allow smaller size actuation balls below the piston to move down and the dis-the toolSPECIFICATION GUIDETool MinODID LengthStandard in.mmin.mmin.mmConnection1.4436.60.4711.920.49518.93/4\" Hydril CS1.6942.90.5313.517.88454.21\" AMMT1.8146.00.5313.517.88454.21\" AMMT2.1354.10.5313.520.90530.61-1/2\" AMMT2.2557.20.4711.923.25590.21-1/2\" AMMT2.5063.50.4711.923.69601.71-1/2\" AMMT2.8873.20.5915.026.75679.52-3/8\" PAC DSI3.1379.50.6917.529.75753.62-3/8\" API Reg3.5088.91.2531.829.75753.62-7/8\" PAC DSI Minimum ID specified is maximum piston ID possible. Smaller piston ID's and different connections available on special request.Rev., September, 2002
122
COILED TUBING STANDARD TOOLS
HIGH LOAD DISCONNECTbe run below impact jars if required. Product Family No. H13213Torsion strength is provided by a unique octagonal spline which rota-DESCRIPTION/APPLICATIONtionally locks the tool.The High Load Disconnect is a ball FEATURES/BENEFITSactuated tool which utilizes hydraulic pressure for activation. This tool •High tensile strengthleaves an internal GS profile for sub-•Used for jarring and motor applica-sequent retrieving operations.tions•Large IDThe disconnect is designed to with-stand high tension and torsion stress-•Shear screws have a predetermined es encountered in thru-tubing fishing valuejarring and motor applications. High •Can be fitted with smaller piston to strength locking dogs allow the tool to run below jarsSPECIFICATION GUIDETool MinODIDLengthStandardin.mmin.mmin.mmConnection1.6942.90.5313.518.38466.91\" AMMT2.1354.10.6917.520.63524.01-1/2\" AMMT2.2557.20.6917.520.63524.01-1/4\" API Reg2.8873.20.8120.626.00660.42-3/8\" PAC DSI2-3/8\" API Reg3.1379.50.8120.623.00584.22-7/8\" PAC DSI2-3/8\" EU 8 Rd3.3885.70.8120.621.25539.82-3/8\" API Reg Minimum ID specified is maximum piston ID possible. Smaller piston ID configurations are available upon request.Rev., September, 2002
Baker Oil Tools
High Load DisconnectProduct Family No. H13213
123
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
Pull Disconnect
Product Family No. H13214
COILED TUBING STANDARD TOOLS
PULL DISCONNECTpredetermined axial load is obtained, Product Family No. H13214the tool will disconnect due to internal components shifting and allowing DESCRIPTION/APPLICATIONthem to release. Upon disconnection, The Thru-Tubing Fishing Pull Discon-the tubing and tool string placed nect offers the ability to disconnect at above the disconnect may now be the central point of this tool by apply-pulled from the well. An external fish-ing a known axial load through the ing neck remains looking up in the tool. The tool is rotationally locked so hole.it is compatible with tools that create torque.FEATURES/BENEFITS•External profileApplying a straight axial pull through •No actuation ball requiredthe tool activates the disconnect. The •No shear screwsload at which this tool is released can be adjusted to accommodate a num-•Torque thru capabilitiesber of different applications. Once a •Adjustable disconnect loadSPECIFICATION GUIDEToolMin Top SubODIDIDStandard in.mmin.mmin.mmConnection1.6942.90.4110.329.00736.61\" AMMT2.1354.10.4411.134.95887.71-1/2\" AMMT2.8873.20.6917.441.251047.82-3/8\" PAC DSI3.3885.90.7519.155.751416.12-3/8\" API Reg2-7/8\" PAC DSIRev., September, 2002
124
COILED TUBING STANDARD TOOLS
RK™ DISCONNECTspecial applications. The operation of all Product Family No. H13215the models are identical.DESCRIPTION/APPLICATIONThe RK Hydraulic Disconnects are ball op-erated devices which require tubing pres-The RK Disconnect has been designed to sure for activation. Once the ball has be used in a one-trip system when milling seated in the tool, pressure is applied to with production tubing in a packerless the coiled tubing which shears the shear completion. The disconnect is run above screws in a sleeve allowing the top section the mill. When the job is complete a ball of the disconnect to unlatch from the bot-can be dropped so that the mill and the tom section. The bottom part of the tool, bottom of the disconnect are released and consisting of the collet seat, piston, and dropped to the bottom of the well. The top check valve, is left in the hole. The top sub remains attached to the tubing and section has a full open inside diameter has tubing ID to allow full access. The RK that is compatible with the inside diameter Hydraulic Disconnects have a built-in of the tubing.check valve that prevents flow from going up the tubing. The Model HL™ Disconnect FEATURES/BENEFITSuses dogs to lock the tool together and •Ball operateduses a dual flapper check valve. The Mod-•Top sub has full tubing IDel FA™ and FAU™ uses collets to lock the •Torque through for milling applicationstool together and uses a ball check valve. •Can be used on end of production tub-The Model FAU is designed for cyclic side ingloading and torque encountered in stan-•Incorporates ball check valve or flapper dard milling operations. The Model FA de-check valvesign is a cheaper, cost efficient version of •Available in different styles for specific the disconnect that should be used for applicationsSPECIFICATION GUIDEModel FAToolMinTop Sub ODIDIDStandard in.mmin.mmin.mmConnection2-3/8\" EU 8 Rd Box3.1379.50.4110.32.1354.12-3/8\" API Reg Box 2-3/8\" EU 8 Rd Box 2-3/8\" API Reg Box 3.7595.30.4411.12.1354.12-7/8\" EU 8 Rd Box2-7/8\" API Reg Box Model FAUToolMinTop SubODIDIDStandard in.mmin.mmin.mmConnection2-3/8\" EU 8 Rd Box3.1379.50.4110.32.1354.12-3/8\" API Reg Box 2-3/8\" EU 8 Rd Box2-3/8\" API Reg Box 3.7595.30.4411.12.1354.12-7/8\" EU 8 Rd Box2-7/8\" API Reg Box Model HLToolMinTop SubODIDIDStandard in.mmin.mmin.mmConnection2-3/8\" EU 8 Rd Box3.1379.50.8120.62.3158.72-3/8\" API Reg Box 2-7/8\" EU 8 Rd Box2-3/8\" API Reg Box 3.6392.20.8120.62.3158.72-7/8\" EU 8 Rd Box2-7/8\" API Reg Box Rev., September, 2002
Baker Oil Tools
RK DisconnectProduct Family No. H13215125
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
Dual Actuated Circulating Valve Product Family No. H13218
COILED TUBING STANDARD TOOLS
DUAL ACTUATED mary means of actuation is accom-CIRCULATING VALVEplished by pumping a ball which will shift the piston sleeve, exposing circu-Product Family No. H13218lation ports. The secondary means of DESCRIPTION/APPLICATIONactuation is through a rupture disc. In the unlikely event that the bottomhole The Dual Actuated Circulating Valve assembly becomes plugged, in-is designed to allow a circulation path creased pressure from the surface will above a mud motor from tubing to an-rupture the disc and allow circulation nulus. When the motor service is of an actuation ball.complete, fluids may need to be pumped for several hours to clean or FEATURES/BENEFITSdisplace the wellbore. The use of this •Saves wear on the mud motorvalve can save unnecessary wear on •Large ID permits maximum flow the mud motor during this operation.ratesThe Dual Actuated Circulating Valve •Predetermined values on shear is ball actuated and normally is run screws, and secondary rupture discbelow the hydraulic disconnect and •Balanced pistonabove the downhole motor. The pri-SPECIFICATION GUIDETool Min ODIDLengthStandardin.mmin.mmin.mmConnection1.4436.60.4110.416.00406.43/4\" Hydril CS1.6942.90.4110.412.56319.01\" AMMT1.8146.00.4110.412.56319.01\" AMMT2.1354.10.5614.214.13358.91-1/2\" AMMT2.3860.50.4411.215.13384.31-1/4\" Reg2.5063.50.5614.214.38365.31-1/2\" AMMT2.8873.20.6917.515.13384.32-3/8\" PAC DSI3.1379.50.6917.516.75425.52-3/8\" API Reg3.5088.91.0025.418.00457.22-7/8\" PAC DSI Minimum ID specified is maximum piston ID possible. Smaller piston ID's and different connections available on request.Rev., September, 2002
126
THRU-TUBING FISHING TOOLS
TYPICAL BOTTOMHOLE ASSEMBLIES FISHING BHA FOR
PARTED COILED TUBING
Baker Oil Tools' unique Snipper Overshot is used to fish parted coiled tubing. The BHA shown uses this technology in combination with a High Pressure Pack-off, a Hydraulic Jar and Accelerator. The overshot has a catch and cutting mechanism, which washes over the top of the coiled tubing. Overpull activates the cutting mechanism to cut the coiled tubing and the cut part can be brought back to surface. This ensures a clean fishneck with bore to allow a smooth path for a chemical cutter should it be required.
COILED TUBING CONNECTOR(Refer to page 119)DUAL BACK PRESSURE VALVE(Refer to page 120)ACCELERATORWEIGHT BARHYDRAULIC JARUNIVERSAL HYDRAULIC DISCONNECT(Refer to page 121)HIGH-PRESSURE PACK-OFF(Refer to page 132)SNIPPER OVERSHOT(Refer to page 130)Parted Coiled Tubing Bottomhole AssemblyRev., September, 2002
Baker Oil Tools
EXTERNAL FISHING BHA
Baker Oil Tools' patented hydraulic release fishing tools have been designed to allow engagement of a fish with an internal or external fishing neck. These tools were designed specifically for coiled tubing or threaded pipe operations where no rotation is possible. The main feature of these tools is that it can be engaged and released by flow. The as-sembly shown combines the Hydraulic Release Overshot with other hydraulic actuated tools to enable fishing thru tubing in larger bore. This BHA can locate a small fishing neck in a larger bore by activating the indexing tool and the hydraulic knuckle joint to systematically search the larger bore and engage the fish.
MOTORHEAD ASSEMBLY(Refer to page 118)INDEXING TOOL(Refer to page 140)HYDRAULIC BENT SUB(Refer to page 159)HYDRAULIC RELEASE OVERSHOT(Refer to page 128)External Fishing Bottomhole Assembly
127
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil ToolsTHRU-TUBING FISHING TOOLSFor Slick OD FishingProduct FamilyNo. H13330
For Fishing NecksProduct Family No. H13331HYDRAULIC RELEASING OVERSHOTProduct Family Nos. H13330 (for Slick OD Fishing)and H13331 (for Fishing Necks)DESCRIPTION/APPLICATIONThe Hydraulic Releasing Overshot is used to catch external JDC type fishnecks or to catch slick OD profiles. The tool is engineered to with-stand high tensile, and compressive stresses encountered during jarring operations. The overshot is engaged by applying slight set-down weight at the tool. A flow path is provided through the tool for circulation while running in the hole; this path can also be used to wash debris from the top of the fish or profile. In the event that retrieval is not possible, in-creased flow rate through the tool will allow release from the fishneck en-suring no additional tools are left in the well.FEATURES/BENEFITS•High strength•Can be used for jarring operations•Flow path permits washing debris from the top of the fish or profile•No shear screws•Design minimizes stress on the grapple sectionSPECIFICATIONSFor Slick OD Fish, Product Family No. H13330Tool ODLengthCatch Sizein.mmin.mmin.mm2.1354.119.25488.01.13, 1.2528.6, 31.82.2557.119.25488.01.3834.92.6366.820.94531.91.25, 1.50, 1.7531.8, 38.1, 44.53.0076.224.25616.02.00, 2.13, 2.2551.8, 54.0, 57.23.5088.924.25616.02.25, 2.38, 2.5057.2, 60.3, 63.53.7094.023.62599.92.3860.33.7595.323.62599.92.8873.04.00101.626.88682.82.63, 2.88, 3.00, 3.1366.7, 73.0, 76.2, 79.4For Fishing Neck, Product Family No. H13331Tool ODLengthFish Neck Type to Catchin.mmin.mm1.4436.616.00406.40.88\1.6341.416.00406.41.19\" JDC1.8146.017.75450.90.88\2.1354.118.38466.91.38\" JDC2.2557.118.63476.20.75\2.2857.918.63473.21.75\" JDC2.6366.818.00457.21.19\2.7068.626.50673.12.7569.918.60472.42.31\" JDC2.8071.118.60472.43.0076.222.25565.23.3885.722.25565.21.19\3.5088.922.25565.23.7595.329.00736.62.75\" JDC4.00101.622.00558.82.75\128
THRU-TUBING FISHING TOOLS
Baker Oil Tools
HYDRAULIC RELEASING GS™ SPEARProduct Family Nos. H13310 (for Slick ID Fish) and H13311 (for Fishing Neck)DESCRIPTION/APPLICATIONThe Hydraulic Releasing GS Spear, specifically designed for thru-tubing fishing operations, is engineered to withstand the high tensile and com-pressive stresses encountered during jarring operations. These spears are designed to engage standard GS fish necks or slick ID fish necks. The non-rotating GS Spear incorporates a clutch matching that of the FAU™ Hydraulic Disconnect so that torque may be transmitted through the tool. A flow path is provided through the tool to allow circulation while running in the hole. Once the profile is encountered, the flow path can be used to create a jetting action to wash debris from the profile. To engage the profile or the slick ID of a fish, minimal set-down weight is applied which moves the collets into the release position allowing it to en-ter the fish ID. Once the spear has adequately entered this ID, the collets or slip will snap into the catch position. To release from the fish or GS pro-file, increased flow rate will move the collet or slip into the release posi-tion.FEATURES/BENEFITS•Maximum ID on collets or slips•High tensile strength•Pump through capabilities•No shear screws•Minimized stress on collets or slipsSPECIFICATIONSFor Slick ID Fish, Product Family No. H13310Tool ODLengthCatch Rangein.mmin.mmin.mm1.8146.018.40467.41.343 to 1.50034.1 to 38.11.438 to 1.62536.5 to 41.32.0050.818.40467.41.590 to 1.78040.4 to 45.22.2557.220.42518.71.750 to 1.97044.5 to 50.01.938 to 2.15049.2 to 54.62.7068.622.00558.82.110 to 2.28053.6 to 57.92.210 to 2.49056.1 to 63.23.0076.224.00609.62.460 to 2.81062.5 to 71.43.3885.924.13612.92.794 to 3.08071.0 to 78.22.900 to 3.19073.7 to 81.03.5088.924.13612.93.125 to 3.37579.4 to 85.7For Fishing Neck, Product Family No. H13311ToolODLengthFish Neck Type to Catchin.mmin.mm1.4436.521.88555.81-1/2\" GS1.6942.918.11460.02\" GS1.8146.018.11460.02\" GS2.1354.120.60523.22-1/2\" GS2.2557.120.35516.92-1/2\2.7068.923.03585.03\" GS3.0076.223.53597.73\3.1379.525.03635.83\" GS3.5088.921.38543.13-1/2\4.50114.325.50647.75\" GS5.88149.225.50647.77\" GSRev., September, 2002
For Slick ID FishProduct FamilyNo. H13310For Fishing NeckProduct FamilyNo. H13311129
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
Snipper OvershotProduct Family No. H13334THRU-TUBING FISHING TOOLS
SNIPPER OVERSHOTThe Snipper Overshot utilizes hard-Product Family No. H13334ened grapple segments to catch the outside of the coiled tubing. These DESCRIPTION/APPLICATIONgrapples slide over the coiled tubing The Snipper Overshot has been de-when washing over, and bite into the signed to allow cutting and retrieval of tubing when tension is applied to the a section of coiled tubing that has workstring. Once the grapple is en-been left in a well. The objective being gaged with the coiled tubing it can be to ensure a clean fishneck with a pushed farther down the tubing to get smooth patch to allow a chemical cut-a “bite” lower on the string providing ter to pass through should it be re-the cut has not been made. quired. The Snipper Overshot has a catch and cutting mechanism which FEATURES/BENEFITSwashes over the top of the coiled tub-•Modular design for multiple sizes of ing. Once the recommended amount coil tubingof coiled tubing is swallowed by the •Retrieves coil tubing above cut in overshot, the fishing string will cut the same triptubing by applying overpull. The •High tensile strengthcoiled tubing above the cut will be re-•Bowl and slip design for cutting and trieved in the same trip.retrievalSPECIALIZATION GUIDETool ODLengthAvailable For CT SizeTo Be CutStandardin.mmin.mm1\"1-1/4\"1-1/2\"1-3/4\"2\"Connection1.8847.726.60675.6x1-1/4\" CS Hydril Box2.2557.124.60624.8xx1-1/2\" CS Hydril Box2.6366.723.63600.2xxx1-1/2\" CS Hydril Box3.1379.523.19589.0xxxxx2-7/8\" Hydril A-95 Box3.3885.823.25590.6xxxxx2-7/8\" CS Hydril Box130
THRU-TUBING FISHING TOOLSCONTINUOUSto the workstring. Leaf springs at-TUBING OVERSHOTtached to each grapple section holds the grapple in the expanded position Product Family No. H13332away from the coiled tubing when the DESCRIPTION/APPLICATIONContinuous Tubing Overshot is being moved down over the tubing to pre-The Continuous Tubing Overshot has vent wear on the grapple teeth. Once been designed to allow fishing of the grapple is engaged with the coiled coiled tubing that has been lost in the tubing it can be pushed farther down hole. The Continuous Tubing Over-the tubing to get a “bite” lower on the shot has a catch or anchoring mecha-string. The Continuous Tubing Over-nism which washes over the top of the shot will not release from the coiled coiled tubing which has been left in tubing to reengage higher on the the hole. string. The Continuous Tubing Overshot uti-lizes hardened grapple segments to FEATURES/BENEFITScatch the outside of the coiled tubing. •Wide catch rangeThese grapples slide over the coiled •May be run on threaded or coiled tubing when washing over, and bite tubinginto the tubing when tension is applied •Tensile yield equal to top connectionSPECIFICATION GUIDEToolODLengthAvailable For CT Size To Be EngagedStandard in.mmin.mm1\"1-1/4\"1-1/2\"1-3/4\"2\"Connection1.8847.724.75628.7x1-1/4\" CS Hydril Box2.2557.124.75628.7xx1-1/2\" CS Hydril Box2.6366.723.63600.2xxx1-1/2\" CS Hydril Box3.1379.523.19589.0xxxxx2-7/8\" Hydril A-95 Box3.3885.823.34592.8xxxxx2-7/8\"CSHydrilBoxBaker Oil ToolsContinuous Tubing OvershotProduct Family No. H13332131
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil ToolsHigh Pressure Pack-OffProduct Family No. H13333
THRU-TUBING FISHING TOOLSHIGH PRESSURE the stuck point to free the tubing. The PACK-OFFpressure tight seal between the coiled tubing and the workstring also allows Product Family No. H13333a hydraulic release device to be oper-DESCRIPTION/APPLICATIONated in the bottomhole assembly which may allow the workstring to be The High Pressure Pack-Off is de-pulled from the well if the stuck tubing signed to be used in conjunction with could not be retrieved.the continuous tubing and snipper overshot. The High Pressure Pack-FEATURES/BENEFITSOff is run directly above the overshot •Allows high pressure circulation and provides a high-pressure seal through a fish[5,000 psi (344.7 bar)] between the •Packing rings are pressure ener-coiled tubing being fished and the gizedworkstring. This allows efficient circu-lation capability down through the •May be manufactured with most tubing threads coiled tubing being fished, which may provide sufficient solids removal at SPECIFICATION GUIDETool ODLengthAvailable For CT SizeTo Be EngagedStandard in.mmin.mm1\"1-1/4\" 1-1/2\"1-3/4\"2\"Connection1.8847.716.00406.4x1-1/4\" CS Hydril Box2.2557.115.00381.0xx2.6366.716.38416.1xxx1-1/2\" CS Hydril Box3.1379.514.75374.7xxxxx2-7/8\" Hydril A-95 Box3.3885.812.88327.2xxxxx2-7/8\"CSHydrilBox132
THRU-TUBING ROTATIONAL SERVICES
TYPICAL BOTTOMHOLE ASSEMBLIES MECHANICAL SCALE REMOVAL BHA
Removing scale is one of the most common thru-tub-ing applications on coiled tubing. Although various other methods of scale removal have been attempt-ed, by far the most consistent success rate has been achieved using mechanical methods. Shown is a typ-ical Baker Oil Tools scale removal BHA. This BHA uses the industry leading Baker Oil Tools Navi-Drill workover motor and the state of the art Turbo Scale Mill which has proven to be the most effective in all options of scale removal.
COILED TUBING CONNECTOR(Refer to page 119)DUAL BACK PRESSURE VALVE(Refer to page 120)UNIVERSAL HYDRAULIC DISCONNECT(Refer to page 121)NON-ROTATING STABILIZER(Refer to page 153)DUAL ACTUATED CIRCULATING VALVE(Refer to page 126)NAVI-DRILL MUD MOTOR(Refer to page 134)TURBO SCALE MILL(Refer to page 136)Mechanical Scale Removal Bottomhole AssemblyRev., September, 2002
Baker Oil Tools
TUBING CUTTING BHA
The BHA shown combines the robust, self stabilizing DB Underreamer with a Navi-Drill workover motor and the Baker Oil Tools Hydraulic/Mechanical Tubing Anchor. The highly reliable anchor is used to elimi-nate pipe movement of the coiled tubing such that the knives of the cutting tool are in a fixed position when circulation is started. The DB Underreamer has been successfully used in many cutting applications for cutting tubing, casing and drillpipe.
MOTORHEAD ASSEMBLY(Refer to page 118)HYDRAULIC TUBING ANCHOR(Refer to page 158)NAVI-DRILL MUD MOTOR(Refer to page 134)DB UNDERREAMER(Refer to page 138)Tubing Cutting Bottomhole Assembly
133
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
Navi-Drill V.I.P. Workover MotorProduct Family No. H13280
THRU-TUBING ROTATIONAL SERVICES
NAVI-DRILL® V.I.P.™strength drive sub also increases the WORKOVER MOTOR
ability of the motor to withstand the most severe cyclic and bending Product Family No. H13280
stresses encountered during opera-DESCRIPTION/APPLICATION
tions.
The Navi-Drill V.I.P. (Versatile In-The operating pressures and flow creased Performance) Workover Mo-rates required to run the Navi-Drill tor series incorporate a PDM design V.I.P. are aligned with coiled tubing with modular capabilities and “fit for and slim pipe to achieve optimum purpose” power section configura-horsepower. Slower rotational speeds tions. The Navi-Drill V.I.P. can be con-improve performance of milling and figured and aligned to suit a wide cutting products, and increase reliabil-range of thru-tubing applications.
ity during workover operations such as milling, underreaming, cutting, OPERATION
wash over, or any other operation re-The Navi-Drill V.I.P. is a versatile de-quiring rotation of a down hole assem-sign incorporating separate stator, top bly.
sub and bearing housing to allow “plug and play” of new modular power FEATURES/BENEFITS
sections tailored to suit specific work •Modular design for customized over applications. The modular de-operations
sign allows utilization of proprietary •Controlled rotational speeds pro-fluid and air power section technology tects cutting matrix
that addresses most well bore tem-•Increased reliability in high end perature ranges and compatibility with applications, (i.e., window milling)well bore fluids. The air power sec-•Proprietary stator technology
tions specifically address single and •May be powered by fluid/air/foamtwo-phase flow applications with nitro-•Capable of operating in tempera-gen. A new design 30% higher
tures over 300°F (149°C)
OPERATING SPECIFICATIONS
ToolODPower
StandardLengthFlow RateSpeed
Differential PressureTorquein.mmSectionConnectionftmGPM
LPM
RPMpsibarft-lbs
Nm1.6942.9M1V1\" AMMT400286690M1ADVBox x Box9.37
2.86
12-5045-190
155-640
100-4102301659802.1354.1M1V1-1/2\" AMMTM1ADV11.383.47
64044140190Box x Box
17-7465-280
160-700
70-300230161201602.88
73.2
M1V2-3/8\" PAC DSI
M1ADV25-120100-450
95-440
80055420570Box x Box
11.983.65
40-18529020360490M1W1
2-7/8\" PAC DSI130-365
800557209753.38 85.8
M1ADMBox x 2-3/8\"16.785.11
80-160300-600
API Reg Box
65-125
290
20
710
960
Also available as 2-3/8\" API Reg Box x Box.Rev., March, 2002Rev., September, 2002
134
THRU-TUBING ROTATIONAL SERVICES
Baker Oil Tools
NAVI-DRILL® X-TREME™ a similar modular design to the exist-WORKOVER MOTORing Navi-Drill V.I.P., offering a broad operating range. The Navi-DrillProduct Family No. H13283X-treme can be configured for fluid, DESCRIPTION/APPLICATIONfoam, or gas (low torque/high speed, high torque/low speed, high torque/The Navi-Drill X-Treme is the new high speed). Components such as generation reduced length workover bearing package and drive shaft have motor that lowers customer well inter-been designed to allow the motor to vention costs by applying new “equi-run under higher stress applications distant” power section technology such as window milling. The overall which provides unmatched perfor-motor length can be reduced to suit mance at lower operating pressures short riser deployment applications than any other workover motor.when required.OPERATIONFEATURES/BENEFITSThe Navi-Drill X-treme is operated as •Increased performancea positive displacement motor, which •Modular design for customized can operate in temperatures exceed-operationsing 400°F (204°C). Proprietary “equi-•Increased reliability in high stress distant” power section technology applicationsprovides the motor with greatly in-creased torque and optimum RPM at •Short lengthlower operating pressures. This also •May be powered by fluid/air/foamallows the motor to be run in more •Capable of operating in tempera-hostile and higher temperature envi-tures over 400°F (204°C)ronments. The Navi-Drill X-treme has OPERATING SPECIFICATIONSOD Power Standard LengthFlowSpeedOp. Op. Torque Temperaturein.mmSectionConnection∆P ftmGPMLPMRPMpsibarft-lbNm°F°CXS5.511.6843530751051.6942.9X1\"7.642.335019064087060150205400204ADAMMT8.332.544015035072550180245XS5.941.81435301051452.1354.1X1-1/2\"65250600250340400204ADAMMT8.172.499.552.91451753001,01570350475XS2-3/8\" API Reg 7.802.385803104202.8873.2Xor 2-3/8\" 10.633.2412045049040620845400204ADPAC DSI12.603.84853252501,160808851,200Note: XS = “Short”; X = Std Length (Mud); AD = Air MotorOperating pressure and operating torque are the maximum values the motor should be run at for continuous operation.PEAK PERFORMANCE SPECIFICATIONSToolMaxMaxStall Stall ODPower SectionTorque ∆P Torque∆Pin.mmft-lbNmpsibarft-lbNmpsibarXS9513054537.5115155655451.6942.9X1902601,090752303101,30590AD22530590562.52703651,09075XS13518054537.5160220655452.1354.1X315425AD4405951,27087.53755105257101,525105XS39053072550470635870602.8873.2X8301,125AD1,1051,5001,4501009351,2701,3301,8001,740120 Maximum pressure and maximum torque are the maximum values the motor can be operated at for a short Navi-Drill X-treme Workover Motorperiod of time, taking increased wear rates into account.
Product Family No. H13283Rev., March, 2002; Rev., September, 2002135
Rev., July, 2004
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
METAL MUNCHER®TURBO SCALE MILLProduct Family No. H15101THRU-TUBING ROTATIONAL SERVICES
The Turbo Scale Mill has been built in various sizes and configurations.
FEATURES/BENEFITS
•Unique mill face design
•Multiple cutting matrices available•Small contact area for low torque con-sumption
•Non-aggressive to tubing wall through stabilization
DESCRIPTION/APPLICATIONThe METAL MUNCHER® Turbo Scale Mill is designed for the removal of scale using low torque output motors. The unique mill face design proves to be ex-tremely effective and has been used for the economical removal of any scale type, including barium sulfate and other hard scales. The design allows for only a small contact area which results in low torque consumption to reduce stalling of the motor. Stabilizers on the body behind the milling matrix reduce the risk of dam-aging the tubing or casing wall.SPECIFICATIONS
Please contact your local Baker Oil Tools Thru-Tubing Fishing Representative for Turbo Scale Mill sizes and configurations available.
METAL MUNCHER Turbo Scale MillProduct Family No. H15101
METAL MUNCHER® STEP MILLProduct Family No. H15113DESCRIPTION/APPLICATIONThe METAL MUNCHER® Step Mill is de-signed for the removal of nipple profiles using low torque output motors. The de-sign proves to be extremely effective and has been used for the economical remov-al of any ID restriction, including barium sulfate and other scales. The design al-lows for only a small amount of cutting per OD increase in the mill. The step fea-ture not only keeps torque and cutting size to a minimum, but also leaves a ma-chine like finish on the surface milled. Wear pads at the largest OD of the mill reduce risk of damage to the tubing or casing string.The step mill has been built in sizes rang-ing from 1-1/2\" (38.1 mm) to 8-1/2\" (215.9 mm) OD. The mill may be manu-factured with a pilot for additional stabili-zation.FEATURES/BENEFITS•Low torque application•Machine like finish left on milled surface•Longer mill life•Will not damage outer stringSPECIFICATIONSPlease contact your local Baker Oil Tools Thru-Tubing Fishing Representative for Step Mill sizes and configurations avail-able.METAL MUNCHER Step MillProduct Family No. H15113
136
THRU-TUBING ROTATIONAL SERVICES
Baker Oil Tools
METAL MUNCHER® which will meet most milling applications, JUNK MILL
with special designs manufactured on re-Product Family No. H15102
quest. Baker Oil Tools maintains a large and varied inventory which will accom-DESCRIPTION/APPLICATION
modate most casing and tubing sizes. The METAL MUNCHER® Junk Mill is de-FEATURES/BENEFITSsigned for the milling of several types of •Increased penetration ratesobstructions and loose debris. The MET-AL MUNCHER Junk Mill utilizes the pat-•Increased mill lifeented METAL MUNCHER cutting
•Smaller cuttings
technology for maximum rate of penetra-•SUPERLOY™ backingtion and extended mill life. The mill de-sign is ideal for motor operations
because of low weight, high speed oper-ations. There are a variety of designs
METAL MUNCHER Junk MillProduct Family No. H15102
SUPERLOY™/OPTI-CUT sert that is ideal for use on mud motors BLADED JUNK MILL
since it creates small cuttings and does Product Family No. H15106
not need high set down weight to perform optimally. Baker Oil Tools offers a variety DESCRIPTION/APPLICATION
of sizes and configurations accommodat-The SUPERLOY™ and Opti-Cut Junk ing all common casing and tubing sizes.Mills that are offered by Baker Oil Tools FEATURES/BENEFITSare designed for milling of debris where •Increased mill lifemilling inserts are considered too aggres-sive. These mills operate very well in the •Smaller cuttings
removal of composite bridge plugs such •Accommodates motor operationsas QUIK Drill™. Opti-Cut dressed mills •Patented technologyuse the patented Opti-Cut star shaped in-
SUPERLOY/Opti-CutBladed Junk Mill
Product Family No. H15106
Rev., September, 2002
137
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
DB UnderreamerProduct Family No. H15097
THRU-TUBING ROTATIONAL SERVICES
DB™ UNDERREAMERspecific hole conditions and operations Product Family No. H15097as well as fishing string configurations.DESCRIPTION/APPLICATIONThe tool is available in three different versions. The standard DB Under-The Model DB Underreamer was de-reamer with one internal adjustable or-signed to underream (cased or open-ifice. The DB Underreamer with hole, with or without pilot hole), adjustable orifices for the flow ports descale and cut pipe and tubing. The that spray over the knives and a DB tool incorporates three arms which Underreamer with a “bit box” which help centralize while in operation and gives the ability to attach a mill for de-are forced out by weight on bit as well sired milling matrix.as pressure. The tool may also be used for backreaming where pressure FEATURES/BENEFITSfrom flow through the tool forces and •Maximum flow after tool is openedholds the knives out.•Blades designed with METAL Cuts are made with pressure only. The MUNCHER® matrixtool incorporates removable nozzles •Sturdy construction for downhole reli-allowing the operator to adjust flow rate abilityand back pressure through the tool. •Positive indication when blades This allows the tool to be fine tuned to reach full gauge•Adjustable nozzles for all flow portsSPECIFICATION GUIDEStandard DB UnderreamerTool Max ODOpen GaugeStandard in.mmin.mmConnection2.1354.16.23158.21-1/4\" API Reg1-1/2\" AMMT2.2557.26.23158.21-1/4\" API Reg1-1/2\" AMMT2.6366.88.12206.21-1/2\" AMMT3.0076.28.60218.42-3/8\" PAC DSI3.6392.29.99253.72-3/8\" PAC DSI2-3/8\" API Reg5.13130.312.00304.83-1/2\" API RegDB Underreamer with Adjustable NozzlesTool Max ODOpen GaugeStandard in.mmin.mmConnection2.6366.88.12206.21-1/2\" AMMT3.0076.28.60218.42-3/8\" PAC DSI3.6392.29.99253.72-3/8\" PAC DSI2-3/8\" API RegDB Underreamer with Bit BoxTool Max ODOpen GaugeStandard in.mmin.mmConnection2.6366.88.12206.21-1/2\" AMMT3.0076.28.60218.42-3/8\" PAC DSI3.6392.29.99253.72-3/8\" PAC DSI2-3/8\" API Reg138
THRU-TUBING ROTATIONAL SERVICES
Baker Oil Tools
HYDRAULIC
enhance the performance of the tool steel TUBING CUTTER
cutter knives.
Product Family No. H17003
FEATURES/BENEFITS
DESCRIPTION/APPLICATION
•Knives are extended by hydraulic pressure and do not require mechanical slips
The Hydraulic Tubing Cutters are pressure-•A three-knife design stabilizes the cutter activated, internal cutters designed to cut and reduces the risk of missed cuts
small diameter pipe and tubing. The tool pro-•Provides safe alternative to explosive or vides a safe alternative to chemical and ex-chemical cutters
plosive cutters. The cutters are
recommended in high-angle holes where •Recommended for high-angle holes where friction and drag may restrict mechanical or friction and drag may restrict mechanical wireline cutter operations.
and wireline type cutters
•Bottom subs with ID and check valve are The Hydraulic Tubing Cutter is made up to a available
coiled tubing string with a tubing anchor to
•Can be deployed on threaded or coiled tubing workstring
SPECIFICATION GUIDE
Tool Tubing
Max
ODRange
Knife SwingLengthStandardin.mmin.mmin.mmin.
mmConnection1.8146.02.37560.32.50063.522558.81\" AMMT1.8847.62.37560.33.62592.132812.81\" AMMT2.1354.12.875 - 3.50073.0 - 88.9
4.375111.129736.61-1/2\" AMMT2.5063.5
3.50088.9
4.875123.8
33
838.2
1-1/2\" AMMT
Hydraulic Tubing CutterProduct Family No. H17003
THRU-TUBING FISHINGThe SR2™ Underreamer is used in con-SR2™ UNDERREAMER
junction with a positive displacement motor and can be deployed on either coiled tubing Product Family No. H15028
or small threaded pipe. The blades of the DESCRIPTION/APPLICATION:
SR2™ Underreamer are actuated by flow; a pressure drop through the tool will acti-The Thru-Tubing Fishing SR2™ Under-vate the piston that pushes out the knives. reamer (Simple Robust and Reliable) is A flow path is provided through the tool designed to pass through small diameter body for circulation through the mill.
production tubing and underream to full gauge in the casing below the tubing. The FEATURES/BENEFITS:
underreamer allows removal of sand, •Small OD
cement, scale, cast iron, and composite bridge plugs without pulling the production •Large expanded gaugetubing. The SR2™ Underreamer is a
•Simple design
2-bladed underreamer provided with a bit •Flow path through the millbox, which gives the ability to attach a mill •Interchangeable mill
with the desired milling matrix.
•SR2™ Underreamers can be run in tan-dem
SPECIFICATION GUIDE
Tool Min
ODMill ODLengthMax Knife ExpansionStandard in.mmin.mmin.
mmin.mmConnection1.65041.9
1.75044.5
22.4
569.0
4.625117.5
1\" AMMT Pin
Thru-Tubing Fishing SR2 UnderreamerProduct Family No. H15028
Rev., September, 2002Rev., February, 2004
139
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
THRU-TUBING ROTATIONAL SERVICES
THRU-TUBING FISHING2-BLADE UNDERREAMERProduct Family No. H13252and should be limited to small size coiled tubing applications. METAL MUNCHER® technology can be used for maximum cutting efficiency.The blades of the underreamer are actuated by flow. A pressure drop through the tool will activate the piston that pushes out the knives. The blades will not be pulled in when flow through the tool has stopped but will be moved in to the retracted position when the tool is pulled back into the production tubing. DESCRIPTION/APPLICATIONThe Thru-Tubing Fishing 2-Bladed Under-reamer has been designed to run through small diameter production tubing and under-ream in casing as large as 7 in. (177.8 mm)below the tubing. The underreamer allows removal of sand, cement or other hardened debris without having to pull the production tubing. The 2-blade design allows smaller tool OD's when compared to the 3-blade models while still maintaining adequate ex-pansion capability for most applications. The 2-Blade Underreamer is used in conjunction with a mud motor and has been designed for FEATURES/BENEFITS••••SmallODLarge expanded gaugeSimple designMETAL MUNCHER bladesSPECIFICATION GUIDETool ODin.1.691.81mm42.946.0Lengthin.13.3113.31mm338.1338.1MaxCasing Gaugein.mm7177.87177.8StandardConnection1\" AMMT Pin1\" AMMT PinThru-Tubing Fishing2-Blade UnderreamerProduct Family No. H13252HYDRAULIC INDEXING TOOLProduct Family No. H13260DESCRIPTION/APPLICATIONThe Thru-Tubing Fishing Hydraulic Indexing Tool offers the ability to orient a fishing tool string in the casing during thru-tubing fishing operations. The Hydraulic Indexing Tool is designed so that all the shifting parts are internal. Thus, the tool length remains the same while in-dexing the tool. Once washing over or fish-ing begins, flow through the indexing tool rotates the tools below the indexing tool in 30 degree increments. The indexing tool can also be used with bent subs and centralizers to help locate fish that are on the high side of the wellbore. In most application when run-ning hydraulic retrieving tools below the in-dexing tool, the indexing tool is actuated using back pressure created by pumping through the hydraulic retrieving tools.FEATURES/BENEFITS•Hydraulically actuated•Large ID•All shifting parts are internalSPECIFICATION GUIDEToolODin.1.691.692.88Hydraulic Indexing ToolProduct Family No. H13260
ToolIDmm42.942.973.2in.0.630.631.00mm16.016.025.4Lengthin.44.1351.6552.50mm1120.91311.91333.5StandardConnection1\" AMMT Box x Pin2-3/8\" PAC DSI Box x Pin Tool is equipped with pressure booster piston for lower pressure activation.140
Rev., September, 2002
THRU-TUBING ROTATIONAL SERVICES
Baker Oil Tools
SET DOWN INDEXING TOOLhole, any additional set-down weight ap-Product Family No. H13259plied actuates the Set Down Indexing Tool. The tool does not allow the tool string to ro-DESCRIPTION/APPLICATIONtate while resetting.The Thru-Tubing Fishing Set Down Index-FEATURES/BENEFITSing tool offers the ability to orient a fishing tool string in the casing during thru-tubing •Indexes 120° when applying set-down fishing operations by applying set-down weightweight. •No hydraulic activation needed•Safe to use with hydraulic activated fish-The Set Down Indexing Tool is designed ing toolssuch that it will provide 120 degree of rota-•Can be used with conventional fishing tion every time it is activated. Once resis-tools that require rotation to be releasedtance is met, such as shouldering on the •Tool will reset when weight is releasedtop of a liner or the top of a fish going in the SPECIFICATION GUIDETool Tool ODIDLengthStandardin.mmin.mmin.mmConnection3.3885.81.0025.437.90962.72-3/8\" API Reg Box x PinSet Down Indexing ToolProduct Family No. H13259
YANKEE SCREWDRIVEROnce set-down weight is released the Product Family No. H13262spring inside the tool resets the tool. The tool does not allow the tool string to rotate DESCRIPTION/APPLICATIONwhile resetting. Set-down weight may be The Thru-Tubing Yankee Screwdriver Tool applied at any time during the resetting offers the ability to rotate a fishing tool process.string below the Yankee Screwdriver byNote: To obtain the maximum amount ofapplying set-down weight. rotation the tool must be fully reset. The toolOnce resistance is met, such as shoulder-may be actuated as many times as requireding on the top of a liner or the top of a fish to complete the fishing operation.going in the hole, any additional set-down FEATURES/BENEFITSweight applied actuates the Yankee Screw-•Gives rotation when applying set-down driver Tool. The additional set-down weight weightgenerates rotational movement of the tool •No hydraulic activation neededstring below the Yankee Screwdriver Tool. Currently the tool has a capability of three •Safe to use with hydraulic activated fish-ing toolscomplete rotations with each full stroke of the tool.•Can be used with conventional fishing tools that require rotation to be released•Tool is reset when weight is releasedSPECIFICATION GUIDEToolToolODIDLengthStandard in.mmin.mmin.mmConnection2.1354.10.512.71293276.61-1/2\" AMMT Box x PinYankee ScrewdriverProduct Family No. H13262Rev., September, 2002
141
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
NOTES
142
Rev., September, 2002
THRU-TUBING FISHING IMPACT SERVICES
Baker Oil Tools
TYPICAL BOTTOMHOLE ASSEMBLIESBI-DIRECTIONAL
VIBRATORY FISHING BHA
When fishing on coiled tubing for devices stuck in hole hy-draulic jars are typically used as means of providing impact force to free the device. With hydraulic jars on coiled tubing the pipe has to be cycled over the gooseneck multiple times to fire and reset the jar. The fishing BHA shown uses the Bi-Directional HIPP-TRIPPER® Vibratory Jar to deliver both upward and downward impact up to 1,000 times per minute. Because the tool resets and activates itself with the aid of overpull or set-down weight and the aid of pumped fluid, cy-cling of the coiled tubing is eliminated increasing coiled tub-ing life.
COILED TUBING CONNECTOR(Refer to page 119)DUAL BACK PRESSURE VALVE(Refer to page 120)UNIVERSAL HYDRAULIC DISCONNECT(Refer to page 121)NON-ROTATING STABILIZER(Refer to page 153)BI-DI HIPP-TRIPPER VIBRATORY JAR(Refer to page 145)HYDRAULIC RELEASING SPEAR(Refer to page 129)Bi-Directional Vibratory Fishing Bottomhole AssemblyRev., September, 2002
IMPACT DRILLING BHA
Baker Oil Tools' Single Directional Impact Drill is used to drill hard packed sand and cement, remove scale and drive debris downhole. The industry leading impact drill can func-tion as a standard impact hammer or, by applying a modu-lar rotational feature, as a rotating impact drill. It has been specifically designed for use on coiled tubing but can be used on threaded pipe in conjunction with an accelerator. Fluid, gas or foam power the tool which can operate in tem-peratures over 600°F (315°C). The BHA shown incorpo-rates an impact drill in combination with a Cut Button Bit for removal of scale or hard formation drilling.
MOTORHEAD ASSEMBLY(Refer to page 118)HIPP-TRIPPER ACCELERATOR(Refer to page 146)WEIGHT BARSI-DI HIPP-TRIPPER IMPACT DRILL(Refer to page 144)CUT BUTTON BIT(Refer to page 147)Impact Drilling Bottomhole Assembly
143
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
THRU-TUBING FISHING IMPACT SERVICES
HIPP-TRIPPERSi-Di Impact DrillProduct FamilyNo. H13400HIPP-TRIPPER® applications for the Si-Di Impact Drill are SI-DI IMPACT DRILLscale milling, cement milling, resin sand re-moval, gravel removal, breaking KOIV discs, Product Family No. H13400chasing junk downhole and shifting sleeves DESCRIPTION/APPLICATION(with the rotation feature removed). Although the drill may be run with or without an intensi-The Single-Directional (Si-Di) HIPP-TRIP-fier, it is always recommended that an inten-PER® is a rotating impact drill that can be sifier be run where surface testing of the tool powered by most types of fluids including is required, working at depths above 600 ft foam and nitrogen. The drill components are (182.55 m) or working with 1-3/4\" OD coiled not affected by xylene, oil or diesel. The tool tubing or larger. The intensifier may be simply can also be run in acid or high H2S environ-described as two telescoping tubes, biased ments using the extreme service tool which downward by means of a spring. utilizes higher grade materials. This tool is available in various sizes to suit a range of FEATURES/BENEFITScompletions. •Operates on most fluid mediums including The Si-Di Impact Drill is powered by fluid nitrogenpumped through the coiled tubing workstring •Temperature rated up to 600°F (315°C)to produce a reciprocating action as well as •Extreme service tools are availablerotation. The frequency of the stroke of the •Does not operate until resistance is mettool is dependent on the amount of weight ap-•Provides rotation as well as impact energyplied to the tool and the volume of fluid being •Various bits available to use with toolpumped through the tool. The drill will not be-•Tool is self tighteninggin operating until the bit has met resistance. •High pressure pulse at bits with each blowThis permits circulation while tripping in and out of the well without damage to the tool or •Allows circulation at all timestubing wall. It is always recommended to run •Can be run with or without rotationthe specially designed HIPP-TRIPPER bits •Not recommended for metal millingwith this tool (Refer to page 147). Common SPECIFICATION GUIDEToolOperatingPumpODPressureRateFrequencyLengthMax PullSet-Down Weightin.mmpsibargpmlpmHzin.mmlbskglbskg26,00011,7931.37534.9500 to 2,00034 to 13811 to 3042 to 11430.7578118,0008,165400 to 1,000181 to 45426,00011,79340,00018,1441.68842.9600 to 2,00041 to 13811 to 7042 to 26536.4092527,00012,24740,00018,144800 to 1,500363 to 6803 to 1727,00012,2472.12554.0400 to 2,10028 to 14511 to 7042 to 26543.63110853,00024,04032,00014,515800 to 2,400363 to 1,0882.87573.0500 to 1,80034 to 12421 to 8480 to 31854.00137255,00024,94832,00014,515800 to 2,800363 to 1,2704.750120.6250 to 2,50017 to 17211 to 12042 to 45447.001194290,000131,542500 to 3,100227 to 1,406Based on 80% of calculated tensile value.Single Directional Impact Drill With Rotational SubIn Addition to the above table, the torque valuesand RPM values are added when applying a rotational sub.Tool ODTorqueSpeedStandardin.mmft-lbsNmRPMConnection1.37534.940 to 15054 to 2033/4\" CS Hydril Box x7/8\" Sonoma Stub Acme Box1.68842.9100 to 250136 to 3391\" AMMT Box x 1-1/8\" UNF Pin2.12554.0120 to 360163 to 4887 to 301-1/2\" AMMT Box x 1-3/4\" UNC Pin2.87573.0160 to 480217 to 6512-3/8\" PAC DSI Box x Pin4.750120.650 to 75068 to 1,0172-7/8\" API Reg Pin x 2-1/2\" Sonoma Acme PinRev., September, 2002
144
THRU-TUBING FISHING IMPACT SERVICES
Baker Oil Tools
HIPP-TRIPPER® BI-DI the tool becomes a vibratory extractor, a VIBRATORY FISHING JARhighly effective method of extracting sand-compacted fish for example. Downward blow Product Family No. H13405forces are amplified and accelerated by DESCRIPTION/APPLICATIONstored internal energy. Drilling also occurs in the downward mode, but is optional. Com-The Bi-Directional (Bi-Di) HIPP-TRIPPER® is mon applications for the Bi-Di Vibratory Fish-capable of delivering both upward and down-ing Jar are shifting sliding sleeves, jarring, ward impact. This tool can be used as a drill swaging open collapsed tubing, resonance, (with the addition of a rotation assembly), a breaking KOIV discs and setting/retrieving fishing jar or a combination of both. The Bi-Di wireline tools in deviated wells. Although the can be powered by most types of fluids in-Bi-Di Vibratory Fishing Jar may be run with or cluding foam and nitrogen. The components without an intensifier, it is recommended al-are not affected by xylene, oil or diesel. The ways that an intensifier be run where surface Bi-Di is available in different sizes to suit dif-testing of the tool is required, working at ferent completions.depths above 600 ft (182.55 m) or working The Bi-Di tools are powered by fluid pumped with 1-3/4\" OD (44.45 mm) coiled tubing or through the coiled tubing workstring and is larger. The intensifier may be simply de-designed to deliver downward blows when scribed as two telescoping tubes, biased put into compression and upward blows when downward by means of a spring. put into tension. Only enough tension to cock the tool is required, usually about 1,500 - FEATURES/BENEFITS2,000 lbs (680.38 - 907.18 kg) above pipe •Operates on most fluid mediums including weight in the up mode. It is not necessary to nitrogencycle the tubing, as the Bi-Di cocks and fires •Temperature rated up to 600°F (315°C)itself with the aid of pumped fluid. The tool •Can provide rotation as well as impact does not contain any mechanical latches and energyutilizes only three moving parts. Blow counts •Resonance and vibratory applicationswill vary in either configuration depending on •Allows circulation at all times if fitted with a fluid volume. At high volume, in the up-mode, velocity switchSPECIFICATION GUIDEToolOperatingPumpODPressureRateFrequencyLengthMax Pull Min PullStandard in.mmpsibargpmlpmHzin.mmlbskglbskgConnection1.75044.45800 to 55 to 11 to 42 to 47,80021,7001\" AMMT 2,50017270265Up Mode:91.0231128,20012,8001,600725Box x Pin2.12553.98700 to 48 to 11 to42 to 2 to 2971,00032,2001-1/2\" AMMT Box1,80012470265119.5303551,00023,1503,0001,360x 1-3/4\" Sonoma Down Mode: Acme Pin2.87573.03350 to 24 to 21 to 80 to 3 to 1776,00034,5002-3/8\" PAC DSI1,6001108431888.6225061,00027,7002,000900Box x PinBased on 80% of calculated tensile value.HIPP-TRIPPERBi-Di VibratoryFishing JarProduct FamilyNo. H13405
Rev., September, 2002Rev., February, 2004
145
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
HIPP-TRIPPER® ACCELERATORSProduct Family No. H13420THRU-TUBING FISHING IMPACT SERVICES
depths of 600 ft (182.55 m) or when working with heavy wall coiled tubing or threaded pipe. The single directional impact drill and the Bi-Di-rectional Vibratory Jar will continue to run with the accelerator in the “bottomed-out” position if the depth of operation provides the required flexibility in the coiled tubing. When this condi-tion occurs, the operator should notice a de-crease in the frequency of blows.DESCRIPTION/APPLICATIONThe HIPP-TRIPPER® Accelerator is used in conjunction with the Single Directional Impact Drill or Bi-Directional Vibratory Jar in applica-tions where the pipe that the tool is deployed on is too stiff for the tool to operate. The accelera-tor also amplifies the impact blows. The accel-erator consists of two telescoping tubes, biased downward by means of a coil spring. The single directional drill and bi-directional jar may be used with or without the accelerator. It is recommended that a mechanical accelera-tor always be utilized when operating above FEATURES/BENEFITS•Variable spring rate•Impact drill and vibratory jar will continue to run with accelerator “bottomed-out”•Allows the tool to operate on surface and at shallow depths•Simple operation and construction•Designed to be used with HIPP-TRIPPERproductsSPECIFICATION GUIDETool ODin.mm1.68842.882.12553.982.87573.034.750120.65Strokein.mm5127.07178.07.5191.010254.0Working Loadlbskg1,6007262,40010892,50011343,0001361Lengthin.mm60.751,54356.951,44764.251,63272.631,845Standard Connection1\" AMMT Box x 1-1/8\" UNF Pin1-1/2\" AMMT Box x Pin2-3/8\" PAC DSI Box x Pin2-7/8\" API Reg Box x PinHIPP-TRIPPER AcceleratorsProduct Family No. H13420 Maximum applied set-down weight when run in conjunction with a single directional impact drill.BLOCK AND BLAST TOOLProduct Family No. H13425DESCRIPTION/APPLICATIONThe Block and Blast Tool provides drilling with impact and the ability to jet-wash tubing in one operation. Until now drilling and acid washing required separate trips.The tool has been designed to be used in con-junction with a Single Direction HIPP-TRIP-PER®. The Block and Blast Tool should be run directly above the Single Direction HIPP-TRIP-PER. Once the HIPP-TRIPPER BHA is run to the desired depth, drop the specified ball to shift the sleeve to open position. This allows the Block and Blast Tool to block off the Single Direction HIPP-TRIPPER and use all the ener-gy to side blast the tubing, casing, or perfora-tions.The blasting should begin from the bottom of the well, slowly pulling up the hole so no solids fall below the bit.FEATURES/BENEFITS•Used with HIPP-TRIPPER Single Direction Impact Drill•Steel ball operated•Able to acid wash•Made out of Nickel Alloy 925 material•Capable of handling hostile fluidsSPECIFICATION GUIDEToolODin.1.69mm42.9in.0.380.44ToolIDmm9.511.1Overall Lengthin.mm18.25463.5Standard ConnectionTop1\" AMMT BoxBottom1-1/8\" UNF PinBlock and Blast ToolProduct Family No. H13425
146
Rev., September, 2002Rev., February, 2004
THRU-TUBING FISHING IMPACT SERVICES
Baker Oil Tools
HIPP-TRIPPER® BITS, SCRATCHES, • Blind Box, used to drive debris downhole (i.e., wireline
SWAGES AND DISK BREAKERS
tools, gun debris), is in some cases used with an extension to place reciprocating members of the hammer drill above Product Family No. H13430
the debris. This device has also unlocked wireline set man-DESCRIPTION/APPLICATION
drels and has fired tubing conveyed perforating guns.
A selection of bits, designed to suit various applications, • Ceramic Disk Breaker is a pointed blind box used to frac-exclusively to be used with HIPP-TRIPPER® impact drills.
ture ceramic or glass isolation disks in well completions.
• Cut Button Bit is the optimum impact bit to use on ce-FEATURES/BENEFITS
ment rock or hard scales. It is also effective on removing •Variety of bits handle most clean out operationssand and other types of fill. The Cut Button Bit has been •Available for standard and hostile environmentssuccessful in removing tubing scale found in geothermal •Impact grade carbide to handle shock loads
wells.
•
Special connections to match Si-Di and Bi-Di lower• Six Point Carbide Bit works well on resin sands, hard
connection
packed sands and fill.
•Can be redressed for multiple runs• Skirted Carbide Bit is recommended to remove thin wall
•Available in a range of sizes
scales. Used as a follow-up bit to the Cut Button Bit.
SPECIFICATIONS
• Geothermal Bit is designed with large air passages to
Please contact your local Baker Oil Tools Thru-Tubing allow scale removal while the well is flowing.
Fishing representative for different bit designs and sizes.
Cut Button BitSkirted Carbide BitCeramic Disk Breaker
Six-Point Carbide BitGeothermal Bit
Tubing Swage
Rev., September, 2002
147
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
THRU-TUBING FISHING IMPACT SERVICES
HIPP-TRIPPER Function TesterProduct Family No. H13440148
HIPP-TRIPPER®FUNCTION TESTERProduct Family No. H13440DESCRIPTION/APPLICATIONThe HIPP-TRIPPER® Function Tester product was specifically de-signed to provide a safe and cost-ef-fective method of testing all HIPP-TRIPPER impact tools in the down mode only. Coiled tubing at above ground conditions is too stiff or rigid to operate the HIPP-TRIPPER impact products in the down mode. The func-tion tester simulates longer coiled tub-ing lengths much like downhole conditions and provides the flex re-quired for down mode testing.The function tester can be used with either the Single Directional Impact Tools or the Bi-Directional Vibratory Hammers. The function tester can ac-commodate tools dressed with or without rotation. Also, the tool is de-signed to capture any discharged flu-ids so that it can be used at a job site.
FEATURES/BENEFITS
•Safe way to test HIPP-TRIPPER (Si-Di) and (Bi-Di) in the down mode only
•Decrease set up test time
•Provide a quick and effective visual inspection verifying the tools func-tion capability
•One size tester accommodates all size HIPP-TRIPPER (Si-Di) and (Bi-Di)
•Simple operation and construction•Discharged fluids can be diverted or captured
Rev., September, 2002
THRU-TUBING DEBRIS CATCHERS
TYPICAL BOTTOMHOLE ASSEMBLIES MILLING BHA WITH METAL CHIP CATCHER
An increasingly common problem in coiled tubing appli-cations is the removal of metal cuttings when milling nip-ples, packers or even windows. The annular velocities are typically too low to carry out the cuttings. The stan-dard milling BHA that is shown uses an ingenious mag-netic Metal Chip Catcher. The Chip Catcher houses magnets that attract metal chips from the pumped fluid and allows these metal chips to be removed from the well. The tool is usually run in combination with a mud motor.
COILED TUBING CONNECTOR(Refer to page 119)DUAL BACK PRESSURE VALVE(Refer to page 120)UNIVERSAL HYDRAULIC DISCONNECT(Refer to page 121)THRU-TUBING FISHING CHIP CATCHER(Refer to page 150)DUAL ACTUATED CIRCULATING VALVE(Refer to page 126)NAVI-DRILL MUD MOTOR(Refer to page 134)METAL MUNCHER JUNK MILL(Refer to page 137)Milling Bottomhole Assembly with Metal Chip CatcherRev., September, 2002
Baker Oil Tools
ROTARY VENTURI CLEANOUT BHA
The BHA shown combines a Venturi Jet Junk Basket with a dressed shoe run in conjunction with a Navi-Drill mud motor. Typically a Venturi Jet Junk Basket is run stand alone but can be run with a motor when there is a requirement to break up compacted debris that is too heavy to circulate to surface. The jet basket uses the venturi principle to create a pressure drop inside the tool. Extension barrels can be inserted in the tool to in-crease the solids carrying capacity of the tool.
MOTORHEAD ASSEMBLY(Refer to page 118)NAVI-DRILL MUD MOTOR(Refer to page 134)VENTURI JET BASKET(Refer to page 150)Rotary Venturi Cleanout Bottomhole Assembly
149
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
THRU-TUBING DEBRIS CATCHERS
VENTURI JET JUNK BASKET
Product Family No. H13051
DESCRIPTION/APPLICATION
The Venturi Jet Junk Basket is used to re-move various types of high-density debris and formation particles within small diameter cased and open wellbores that are too heavy to be circulated to surface. Flow in the top of the tool passes to the outside via adjustable jets. The jets cause a pressure drop on the in-side of the Venturi Basket, which acts as suc-tion at the bottom inlet of the tool. Fill is stirred up by the flow coming down the outside of the tool. With the suction at the bottom inlet, the fill is then carried through finger cages into the
tool’s internal filter. The strained fluid then passes out at the top with the pumped fluid. The fill is then trapped between the filter
above and the finger cages below. Extensions increase the amount of fill dirt that can be brought to surface on each trip. Venturi Jet Junk Baskets can be fitted with a dressed shoe and can be run below mud motors to “break up” and retrieve debris which may be compacted.
FEATURES/BENEFITS
•Fully closed finger or flutter catchers
•Can be run with any type of dressed shoe•Have adjustable reservoir through exten-sions
SPECIFICATION GUIDE
ToolODin.1.692.062.633.13
Venturi Jet Junk BasketProduct Family No. H13051
mm42.950.866.679.3
StandardConnectionAW Rod PinAW Rod Pin1-1/4\" API Reg Pin2-3/8\" API Reg Pin
MinFlow RateGPMLPM12.5
46.8
Max
Flow RateGPMLPM8531985319120450135506
THRU-TUBING FISHING CHIP CATCHERProduct Family No. H13102DESCRIPTION/APPLICATIONThe Thru-Tubing Chip Catcher is run above the motor on a milling job to help remove the cuttings from the well. The tool houses magnets that attract metal chips from the wellbore fluid and allows these metal chips to be removed from the well. The tool is extremely useful when used on coiled tubing where annular velocities are below the velocity needed to carry cuttings out of the well. In mud motor applications the Chip Catcher is run directly above the motor. The magnets are of the donut style and are cov-ered by a housing for easy cutting removal. A centralizer is incorporated in the tool to main-tain a standoff from the casing such that cut-tings will remain on the tool while pulling out of the hole.FEATURES/BENEFITS•Catches cuttings downhole•Helps keep metal cuttings out of mud sys-tem•Magnets are enclosed in housing for easy cutting removal•Special centralizer feature to maintain standoff from casingSPECIFICATION GUIDETool ODin.3.50mm88.9in.0.63ToolIDmm16.0Length in.143.63mm3648.2StandardConnection2-7/8\" PAC DSI Box x Pin Centralizer OD is 4.50\".Thru-Tubing FishingChip Catcher
Product Family No. H13102
150
Rev., September, 2002
THRU-TUBING ACCESSORY TOOLS
TYPICAL BOTTOMHOLE ASSEMBLIESLATERAL WASH BHA
Baker Oil Tools offers an extensive amount of tools that can be used as accessory tools for standard mill-ing and fishing assemblies. The BHA shown incorpo-rates three of these highly useful tools. The indexing tool enables a BHA to rotate in 30° increments with high torque. The Hydraulic Bent Sub is designed to provide a means of hydraulically “kicking over” a tool-string for entry into laterals or for fishing applications. The high flow Spinning Wash Tool is used to efficient-ly wash sand and debris.
COILED TUBING CONNECTOR(Refer to page 119)DUAL BACK PRESSURE VALVE(Refer to page 120)UNIVERSAL HYDRAULIC DISCONNECT(Refer to page 121)INDEXING TOOL(Refer to page 140)HYDRAULIC BENT SUB(Refer to page 159)SPINNING WASH TOOL(Refer to page 160)
Lateral Wash Bottomhole AssemblyRev., September, 2002
Baker Oil Tools
SHIFTING BHA
The Baker Oil Tools Shifting BHA is utilized in wells that are completed for selective production. The
HB-3™ Shifting Tool is a highly efficient and operator friendly tool that will automatically disconnect when the sleeve is fully shifted. It has been designed to shift Baker Oil Tools Type HL™ or CM™ Series Sliding Sleeves. The energy to shift the sleeve is provided by the Bi-Directional HIPP-TRIPPER® Vibratory Jar. With this BHA the sleeve can be opened and closed in one run, also the formation can be treated without pulling out of hole.
MOTORHEAD ASSEMBLY(Refer to page 118)NON-ROTATING STABILIZER(Refer to page 153)BI-DI HIPP-TRIPPER VIBRATORY JAR(Refer to page 145)NON-ROTATING STABILIZER(Refer to page 153)HB-3 SHIFTING TOOL(Refer to page 156)NON-ROTATING STABILIZER(Refer to page 153)HB-3 SHIFTING TOOL(Refer to page 156)WASH NOZZLEShifting Bottomhole Assembly
151
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
Standard CentralizerProduct Family No. H13220
THRU-TUBING ACCESSORY TOOLS
HYDRAULIC sizes, a boost piston has been added CENTRALIZER AND to reduce the pressure to activate. HYDRAULIC DRILLING The boost piston doubles the piston area of the tool.CENTRALIZERThe Hydraulic Drilling Centralizer can Product Family Nos. H13220also be used in milling and under-and H13221reaming operations to stabilize the DESCRIPTION/APPLICATIONbottomhole assembly.The Thru-Tubing Hydraulic Actuated FEATURES/BENEFITSCentralizer offers the ability to central-•Centralizes tool strings in highly ize a fishing tool string in the casing deviated wellsduring thru-tubing fishing operations. •Large flow throughout tool is possi-The centralizer is run in the hole with ble without activating centralizing the bow springs in a retracted posi-springs by changing choke sizetion, thus allowing easy passage •Large expansion rating with small through the production tubing. Once run-in diameterfishing operations begin, flow through the centralizer extends the springs to •Collapsible spring allows normal run contact the casing wall and centralize in holethe fishing string in the hole. On the •Adjustable sleeve allows running in 1.69\" (42.9 mm) and 1.81\" (46.0 mm) different casing sizes without changing springsSPECIFICATION GUIDEStandard CentralizerTool Tool ODIDLengthCasing Standardin.mmin.mmin.mmRangeConnection1.6942.90.4711.947.001193.84-1/2\" - 7-5/8\"1\" AMMT Box x Pin1.8146.00.4711.947.251200.22-3/8\" - 7\"1\" AMMT Box x Pin2.1354.10.6316.045.001143.04-1/2\" - 9-5/8\"1-1/4\" API Reg Box x Pin1-1/2\" AMMT Box x Pin2.8873.20.6316.045.001143.04-1/2\" - 9-5/8\"2-3/8\" PAC DSI Box x Pin3.1379.51.0025.443.631108.27\" - 7-5/8\"2-3/8\" API Reg Box x Pin ID specified is tool ID without orifice installed. Drilling CentralizerTool Tool ODIDLengthCasing Standardin.mmin.mmin.mmRangeConnection1.6942.90.4711.947.001193.84-1/2\" - 7-5/8\"1\" AMMT Box x Pin2.1354.10.6316.063.631616.24-1/2\" - 9-5/8\"1-1/2\" AMMT Box x Pin2.8873.20.6316.045.001143.04-1/2\" - 9-5/8\"2-3/8\" PAC DSI Box x Pin3.0076.21.0025.443.441103.44-1/2\" - 10-3/4\"2-3/8\" PAC DSI Box x Pin ID specified is tool ID without orifice installed Rev., September, 2002
152
THRU-TUBING ACCESSORY TOOLS
Baker Oil Tools
SLEEVE TYPE NON-the fishing assembly. Two stabilizers are rec-ROTATING STABILIZER
ommended to improve centralization. Sleeve rotation begins as string rotation caused the Product Family No. H17130
sleeve’s mild steel blades to meet the resis-DESCRIPTION/APPLICATION
tance of the casing walls.
The Sleeve Type Non-Rotating Stabilizer pro-FEATURES/BENEFITS
vides maximum centralization during milling, •Provides maximum control for cutting and cutting, and fishing operations. The stabilizer milling operations
consists of a mandrel, top sub, and sleeve. •Non-rotating sleeve reduces vibrationThe stabilizer blades are manufactured from •Reduces shock load on cutter knives for mild steel to reduce the risk of damage to nip-longer cutting life
ple profiles. The stabilizer is usually run direct-•Sleeves made from mild steel to minimize ly above the mud or air motor or directly below wear on tubing or casing
the disconnect in a fishing string.
•Easily field dressed to accommodate differ-The Sleeve Type Non-Rotating Stabilizer is ent tubing ID’s
normally run in the string immediately above
•Available in all standard thru-tubing connec-tions and sizes
SPECIFICATION GUIDE
BodyMinimumOD
Tubular IDStandard
in.mmin.mmConnection2.1354.12.3158.71-1/2\" AMMT Box x Pin2.8873.23.2582.62-3/8\" PAC DSI Box x Pin3.1379.54.00101.62-3/8\" API Reg Box x Pin3.7595.34.89124.22-7/8\" API Reg Box x Pin4.25108.05.68144.23-1/2\" API Reg Box x PinSleeve Type
Non-Rotating Stabilizer4.75
120.7
6.00152.4
3-1/2\" API IF Box x Pin
Product Family No. H17130
MECHANICAL BOW mandrel allowing the bow springs to collapse SPRING CENTRALIZERand extrude. The bow springs will collapse to the OD of the tool allowing it to pass restric-Product Family No. H13224tions in the completion. The amount of extru-DESCRIPTION/APPLICATIONsion of the bow springs is limited by upsets on the mandrel.The Thru-Tubing Fishing Mechanical Bow Spring Centralizer offers the ability to central-The Mechanical Bow Spring Centralizer ize a fishing tool string in the casing during should be run below the disconnect (where thru-tubing fishing operations. The Mechani-possible) in all thru-tubing fishing and milling cal Bow Spring Centralizer can also be used applications.in underreaming applications to stabilize the FEATURES/BENEFITSBHA from excessive side loading incurred •Up to 8\" (203.2 mm) maximum expansion with coil tubing applications.•No actuation requiredThe Mechanical Bow Spring Centralizer utiliz-•Available in most thru-tubing connections es 5 drag or bow springs which travel on a and sizesSPECIFICATION GUIDEToolToolExpandedODIDLengthODStandard in.mmin.mmin.mmin.mmConnection1.6942.90.4711.943.001092.244.251124.06.500165.11\" AMMT Box x Pin1.8146.00.4711.945.501155.76.637168.61\" AMMT Box x Pin2.1354.10.8120.645.001143.06.930176.01-1/2\" AMMT Box x Pin2.8873.20.9925.150.751289.07.719196.12-3/8\" PAC DSI Box x PinMechanical Bow Spring CentralizerProduct Family No. H13224
Rev., September, 2002
153
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
THRU-TUBING ACCESSORY TOOLS
SINGLE KNUCKLE JOINT
AND DOUBLE KNUCKLE JOINT
Product Family Nos. H13230 and H13231
DESCRIPTION/APPLICATION
The Thru-Tubing Knuckle Joints are used in fishing operations in deviated wellbores, or in any situation requiring centralization of the catch tool in the cas-ing.
The knuckle joints are used in conjunction with a thru-tubing hydraulic or mechanical centralizer in or-der to allow centralization of the catch tool without having to overcome the weight of the workstring against the bottom side of the casing. The hydraulic or mechanical centralizer, therefore, only has to support the weight of itself and the catch tool run be-low. The knuckle joints design allows fluid flow through the tool, so it can be utilized in washover op-erations. The knuckle joints may be used in either tubing or wireline fishing applications. The standard knuckle joints are not sealed, but the tolerances are such that at a sufficient flow rate, the knuckle joint seals between the ball sub and the ball retainer to activate any hydraulic actuated tools below the knuckle joint. A sealed knuckle joint has beendesigned for low flow rate applications.
FEATURES/BENEFITS
Single Knuckle JointProduct Family No. H13230
Double Knuckle JointProduct Family No. H13231
•Less force required to centralize BHA•Pump through capabilities•Torque through capabilities
SPECIFICATION GUIDE
Single Knuckle Joint
Tool ODin.mm1.691.752.132.883.136.0042.944.554.173.279.5152.4
ToolIDin.0.560.560.811.001.002.00mm14.214.220.625.425.450.8
Lengthin.12.2511.2511.5012.5015.6312.0015.8817.7538.00mm311.2285.8292.1317.5397.0304.8403.4450.9965.2
Type
StandardSealed / Torque ThroughStandardSealedStandardSealed / Torque ThroughSealed / Torque Through
StandardStandardStandardConnection
1\" AMMT Box x Pin
1-1/2\" AMMT Box x Pin2-3/8\" PAC DSI Box x Pin2-3/8\" API Reg Box x Pin4-1/2\" NC46 Box x PinDouble Knuckle Joint
ToolODin.1.692.133.13
mm42.954.179.5
Tool IDin.mm0.5614.20.8120.61.0025.4
Lengthin.
20.5022.2528.00
mm520.7565.2711.2
Type
Sealed / Torque ThroughSealed / Torque ThroughStandard
StandardConnection1\" AMMT Box x Pin1-1/2\" AMMT Box x Pin2-3/8\" API Reg Box x Pin
154
Rev., September, 2002
THRU-TUBING ACCESSORY TOOLS
Baker Oil Tools
NIPPLE PROFILE enough to allow the locator to pass LOCATOR
through the nipple. The contour of the spring allows the tool to move through Product Family No. H13225
restrictions easily but with sufficient DESCRIPTION/APPLICATION
force to be detected at surface when passing through a restriction. To over-The Thru-Tubing Nipple Profile Loca-come the effects of hole drag in devi-tor is a simple means of locating a ated wells, the adjustment sleeve known position downhole, allowing for allows the tension on the spring to be more accurate positioning of the tool changed so there will be greater or string. This is especially important less drag required to pass through the with a coiled tubing workstring due to restriction.
the variation in tubing elongation.The Nipple Profile Locator cannot be The Nipple Profile Locator consists of used as a tubing end locator.
three leaf springs retained in a hous-ing. An upset in the middle of the FEATURES/BENEFITS
springs is an expanded diameter •Simple design
greater than the maximum ID of the •Adjustable drag force
nipple profile it is intended to locate; however, the spring can collapse
•Will locate in most nipples•Mechanically operated
Nipple Profile LocatorProduct Family No. H13225
SPECIFICATION GUIDE
Tool Tool
Fit forODIDLengthTubing SizeStandard
in.mmin.mmin.
mmin.mmConnection1.6942.90.6917.524.00609.62.37560.31.8146.00.6917.524.00609.62.37560.31\" AMMT Box x Pin2.1354.10.8120.627.50698.52.87573.02.5063.50.8822.434.75882.73.50088.91-1/2\" AMMT Box x Pin3.0076.20.9423.941.381051.14.000101.62-3/8\" PAC DSI Box x Pin3.3885.8
1.2531.8
40.99
1041.1
5.000127.0
2-3/8\" API Reg Box x Pin
155
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
HB-3™ SELECTIVESHIFTING TOOLProduct Family No. H81198THRU-TUBING ACCESSORY TOOLS
•Application of internal hydraulic pressure down the coiled tubing will allow linkage arms to expand
•Low actuation pressure required to expand linkage
•Linkage system exerts maximum radial force when extended and latched into sleeve insert•Small run in OD
•Wash ports under linkage arms allow debris to be washed away
•Can be run in tandum to shift up and down in one trip
DESCRIPTION/APPLICATIONThe HB-3 Hydraulic Shifting Tool is designed for shifting the Baker Oil Tools Type HL™ or CM™ Series Sliding Sleeve by tubing. A flow passage allow washing with tubing while run-ning in well. After washing past the sleeve, an increase of pump pressure causes a piston to compress a spring, allowing a second spring to extend a set of linkage arms extending out. The insert can be shifted either by directly pushing or pulling on the coiled tubing or by use of an impact tool. After the sleeve is shift-ed, the shifting tool will automatically release. A decrease in pump pressure once again re-tracts the linkage arms and allows unimpeded movement up and down the hole.SPECIFICATION GUIDE
ToolSizein.3.50
mm88.9
in.2.50
OD
mm63.5
Shifts Sleeve Sizesin.mm2.5665.02.7569.82.8171.33.4387.13.6893.43.7595.23.8196.7
FEATURES/BENEFITS•Fully selective operation, can be run or
retrieved through multiple sliding sleeves without manipulating the sleeve4.50114.33.0076.2
HB-3 SelectiveShifting ToolProduct Family No. H81198
POWER STROKERProduct Family No. H81128FEATURES/BENEFITS•Applies 17,500 lbs (7936 kg) of force, using 3,500 psi (241 bars)•Runs on standard coiled tubing•Can open and close more than one sleeve per run, utilizing tandem HB-3’s•Emergency shear release•Will not locate in a profile until 1000 psi (69 bars) is applied – this allows the HB-3 to locate the sleeve•Has a self-cleaning filter, so the fluid in the piston area of the tool is always clean•Slimline OD for maximum bypass when running DESCRIPTION/APPLICATIONThe Baker Coiled Tubing Power Stroker is de-signed to run in conjunction with the HB-3 Shifting Tool. The Power Stroker provides a means to locate and anchor in a Model HL or CM Sliding Sleeve. After it is anchored, the Power Stroker provides an additional down-ward force with applied hydraulic pressure through the coiled tubing. This applied force is independent of the force applied by the coiled tubing. By locating the sliding sleeve with the HB-3 before the Power Stroker is activated, any sleeve can be shifted selectively. SPECIFICATION GUIDEMaxODin.3.00mm76.2in.0.50MinODmm12.7Max Working Pressurepsi5,000bar345Normal Operational Pressurepsibar3,500241Down Force at 3,500 psilbs17,500kg7,936Tensile Through The Toolsq. in.sq. mmlbskg5.003.22580,00036,281Power Piston AreaRequired Tension For Shear Releaselbskg25,00011,340Power Stroker Product FamilyNo. H81128
156
THRU-TUBING ACCESSORY TOOLS
Baker Oil Tools
SINGLE SWIVEL tool can rotate when set-down weight is ap-AND DUAL SWIVEL
plied. Product Family Nos. H13264 (Single)FEATURES/BENEFITSand H13263 (Dual)
•Simple designDESCRIPTION/APPLICATION
•Simplifies makeup of BHA •Not suitable for mud motor operationsA Single and Dual Swivel are used to allow the tool string below the swivel to remain sta-SPECIFICATION GUIDEtionary, while turning the connection above. Single SwivelThis eliminates the need to turn the whole ToolToolstring of tools in order to make up the top ODIDLengthStandardtools. The Single Swivel has a bearing for ten-in.mmin.mmin.mmConnectionsion only. The Dual Swivel has bearings for 1.6942.90.6917.514.04356.61\" AMMT Box x Pinboth tension and compression.
2.1354.10.8120.616.23412.21-1/2\" AMMTBox x PinThe standard swivel is normally assembled in the tool string just below the Coiled Tubing 2.8873.21.1930.214.58370.32-3/8\" PAC DSIBox x PinConnector. Once assembled in the tool string 3.5088.91.5038.117.20436.92-7/8\" PAC DSIit provides a swivel point below the tubing Box x Pinconnector for the purpose of making up tools. The Single and Dual Swivels are a typical Dual SwivelToolToolswivel design with friction type thrust bearing. ODIDLengthStandardThe mandrel and bottom sub are free to turn in.mmin.mmin.mmConnectionwith respect to the top sub and housing. The 1.6942.90.6917.513.32338.31\" AMMT Box x PinDual Swivel has friction type thrust bearings on top as well as on the bottom, so that the
2.1354.10.8120.617.48444.01-1/2\" AMMTBox x PinSingle and Dual SwivelProduct Family No.H13264 and H13263
LOCKABLE SWIVEL
Once the tool string is made up, the wedge is Product Family No. H13265
removed allowing the torque ring to engage with lugs in the housing and lock the tool to-DESCRIPTION/APPLICATION
gether rotationally. When the tools are re-The Lockable Swivel is designed to perform trieved the swivel can be made free turning the same features as a standard swivel when again and held in this position with the unlock-making up the tool string. But, when the tool ing wedge.string is ready to be run in the hole, the swiv-FEATURES/BENEFITSel's clutch will engage to torque lock the tool. This makes it suitable for jobs where rotation-•Used for deployment of long tool stringsal resistance of the coiled tubing is required. •Pressure deployment applicationsWhen the tool string is broken down coming •Rotationally lockedout of the hole the swivel's clutch can be dis-engaged to allow the swivel to turn for ease in SPECIFICATION GUIDEbreaking down the tools.
ToolTool The Lockable Swivel is normally assembled ODIDLengthStandardin the tool string just below the Coil Tubing in.mmin.mmin.mmConnectionConnector. After the swivel is made up to the 1.6942.90.6917.515.14384.61\" AMMTBox x Pintubing connector the swivel is made free turn-2.1354.10.7519.117.51444.81-1/2\" AMMT ing by pulling the torque ring down to disen-2.3860.30.7519.117.51444.8Box x Pingage the torque ring lug from the lug on the 2.8873.21.0025.422.23564.62-3/8\" PAC DSI Box x Pinhousing. The torque ring is then held in the 3.1379.51.0025.422.23564.62-3/8\" API Reg disengaged position by pushing the unlocking Box x Pinwedge, a special design C-plate, between the 3.5088.41.5038.124.84630.92-7/8\" PAC DSI Box x Pinhousing and the torque ring so the swivel is free to rotate as the tool string is made up.
Lockable SwivelProduct FamilyNo. H13265
Rev., September, 2002
157
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
OPTIMUM FLOW BYPASS SUBProduct Family No. H13289THRU-TUBING ACCESSORY TOOLS
reached, the tool will divert all access fluid to the annulus through a bypass port. The point at which the tool begins to bypass fluid to the annulus can be adjusted. The size of the by-pass port responds automatically to flow rates. Motor stalls can still be observed be-yond the activation point of the sub. The Opti-mum Flow Bypass Sub can be adjusted to suit various densities of fluid.
DESCRIPTION/APPLICATIONThe Optimum Flow Bypass Sub is designed to be used on coiled tubing or threaded work-string with a mud motor. The sub provides a constant optimum flow to the workover motor or the BHA below. Flow rates above the acti-vation point are ejected to the annulus through a bypass port to give an increased annular velocity. The Optimum Flow Bypass Sub is located in the BHA directly above the motor and mill. Once the activation point of the sub has been FEATURES/BENEFITS
•Delivers constant optimum flow to the motor•Enables increased annular velocity without premature motor wear•Fluid compatible
•Enables better cleaning capacity of the well-bore
SPECIFICATION GUIDE
Tool ODin.2.883.13
Optimum Flow Bypass SubProduct Family No. H13289
Length
mm73.279.5
in.22.7222.72
mm577.1577.1
StandardConnection2-3/8\" PAC DSI Box x Pin2-3/8\" API Reg Box x Pin2-7/8\" PAC DSI Box x PinTHRU-TUBING FISHING HYDRAULIC/MECHANICAL TUBING ANCHORProduct Family No. H13226The tool is designed so that the top sub and bottom sub can be reversed. This allows the tool to be run reversed using tension to hold the anchor. (This feature is not available in the 1.69\" [42.9 mm] size.)DESCRIPTION/APPLICATIONThe Hydraulic/Mechanical Tubing Anchor is used to anchor the bottomhole assembly in-side the tubing.The Hydraulic/Mechanical Tubing Anchor uses a cone and collet to anchor the tool to the tubing. The collet is attached to a piston so that hydraulic pressure is used to activate the tool. Mechanical downward force then holds the an-chor while other operations are performed.FEATURES/BENEFITS•Hydraulically activated•Will eliminate movement of coiled tubing while cutting•Can be run in conjunction with a workover mud motor•Optimum slip design•Can be run reversed for upward anchoring useSPECIFICATION GUIDETool ODin.1.692.062.503.13mm42.952.463.579.5Tubing Sizein.mm2-3/860.32-7/873.03-1/288.94101.64-1/253.5088.95-1/2139.717.0-40.525.3-60.3114.3127.0Tubing Weightin.mm4.6-5.86.8-8.66.5-8.69.7-12.89.2-12.713.7-18.99.5-11.014.1-16.49.5-26.511.5-29.214.1-39.417.1-43.5Standard ConnectionBoxPin1\" AMMT 1-1/2\" AMMT1-1/2\" AMMT2-3/8\" PAC DSI2-3/8\" API Reg2-3/8\" PAC DSI2-3/8\" API Reg2-3/8\" PAC DSI2-3/8\" API RegHydraulic/Mechanical Tubing AnchorProduct Family No. H13226158
Rev., September, 2002
Rev., April, 2003
THRU-TUBING ACCESSORY TOOLS
Baker Oil Tools
HYDRAULIC BENT SUB
requires hydraulic pressure to operate. Either Product Family No. H13236
a choke sub or a nozzle below the tool can generate this pressure. The nozzle size can DESCRIPTION/APPLICATION
be predetermined to allow maximum kick over The Hydraulic Bent Sub (Knuckle Joint) is de-force at the tool. The hydraulic pressure can signed to provide a means of hydraulically also be generated by a hydraulic release fish-“kicking over” a toolstring for entry into laterals ing overshot or spear which already uses a or for fishing applications (i.e., side pocket nozzle for activation. The tool can also be mandrels or fish lying high side in the comple-used with a boost piston to lift larger loads or tion or liner).
where only low flow rates are available.
The tool is generally run below an indexing FEATURES/BENEFITS
tool to allow full radial rotation. The BHA is run •Easily adjusted for deflection of two to ten in the well to depth and the flow rate is in-degrees
creased to activate the Hydraulic Knuckle •Anvil establishes predetermined deflection Joint. As the flow rate is cycled the indexing angle
tool rotates allowing the fishing tool or entry •Kick over force easily controllable by device to find the fish or lateral. The maximum hydraulic pressure differential
kick over angle is determined by selection of •Positive rotational control when used with the appropriate anvil from a minimum of two indexing tool
(2) to a maximum of ten (10) degrees in two degree increments. The Hydraulic Bent Sub
SPECIFICATION GUIDE
ToolToolODID
LengthStandardin.mmin.mmin.mmConnectionHydraulic Bent Sub2.13
54.1
0.81
20.6
16.23
412.2
1-1/2\" AMMT Box x Pin
Product Family No. H13236
DEPLOYMENT BARthe same as the CT or threaded pipe used to Product Family No. H16055deploy the BHA in the hole. Deployment Bars have high tensile and torsion capabilities and DESCRIPTION/APPLICATIONthe most commonly used small diameter con-Deployment Bars are used to provide a safe nections.means of handling coiled tubing (CT) or small FEATURES/BENEFITSthreaded pipe bottomhole assembly (BHA) at •Increase safety when handling lengthy surface in applications where the BHA that is BHA'srun in hole or retrieved from the hole is longer than the riser height available.•Available in all standard CT sizes•High tensile and torsion strengthThe Deployment Bar is used to hang and seal off parts of a BHA. The Deployment Bar OD is SPECIFICATION GUIDETool Tool ODIDLengthAvailable for CT SizeStandardin.mmin.mmin.mm1\"1-1/4\"1-1/2\"1-3/4\"2\"2-3/8\"Connection1.6942.90.5012.7x0.7519.1xx1\" AMMT Box x Pin0.5012.7x2.1354.10.7519.1xx1-1/2\" AMMT Box x Pin1.0025.4x0.7519.1x2.8873.21.0025.41.5038.152.001320.8x2-3/8\" PAC DSI Box x Pinxx0.7519.1x1.0025.4x2-3/8\" API Reg Box x Pin3.1379.51.5038.1xx0.7519.1xDeployment Bar1.0025.4x2-7/8\" PAC DSI Box x PinProduct Family No. H160551.5038.1xxRev., September, 2002
159
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING Baker Oil Tools
SPINNING WASH TOOLProduct Family No. H13266THRU-TUBING ACCESSORY TOOLS
may be used to impregnate scales with acid or other inhibitors. Also many differ-ent corrosives, neutralizers and other flu-ids may be circulated, as the bearing assemblies are isolated.
The tool is capable of withstanding pres-sures commonly used with coil tubing and snubbing operations and has adequate strength to withstand spudding tech-niques typically used in sand washing.
DESCRIPTION/APPLICATIONThe high flow Spinning Wash Tool is used to efficiently wash sand and debris. Fluid is pumped through a rotating nozzle that directs the flow to the bottom and sides of the hole. The Spinning Wash Tool has a high speed wash head running on two sets of bearings. The two jetted blades efficiently clear loose scale, sand and debris reduc-ing drag on tubing during running in and out of the well. This increases working depth capabilities, particularly in highly deviated wellbores. Additionally, this tool FEATURES/BENEFITS
•High speed rotation•Sealed bearings
•May be run with a variety of fluids
•Can be run on coiled tubing or conven-tional threaded pipe
SPECIFICATION GUIDE
Tool ODin.1.441.691.752.25
mm36.642.944.557.2
Lengthin.15.6914.6914.6916.21
mm398.5373.1373.1411.7
StandardConnection3/4\" CS Hydril Box x Pin1\" AMMT Box x Pin1-1/2\" AMMT Box x Pin
Spinning Wash ToolProduct Family No. H13266
REVERSE CIRCULATING AND JETTING TOOLProduct Family No. H13288DESCRIPTION/APPLICATION:The Reverse Circulating and Jetting Tool is used to clean sand from the hole by re-verse circulating. It is used when veloci-ties are not sufficient to carry sand to the surface in the annulus. Sand is retrieved through a large bore in the tool and up the coiled tubing.The tool can also be used as a jetting sub to break up the sand bridges. In forward circulating mode a flapper closes off thethrough bore diverting flow to four jet noz-zles. The nozzles have tapered carbide inserts for efficient, long-wearing perfor-mance and can be redressed in various sizes.The Reverse Circulating and Jetting Tool is capable of withstanding pressures and flows common with coiled tubing opera-tions.FEATURES/BENEFITS:•Full large bore through tool•Carbide nozzle inserts•Swirl pattern jetting coverage•Uses field-proven flapper systemSPECIFICATION GUIDETool ODin.mm2.88 73.23.5088.9ToolIDin.0.811.00mm20.62.54Lengthin.16.90 21.49mm429546StandardConnection2-3/8\" PAC DSIReverse Circulating and Jetting Tool
Product Family No. H13288
160
Rev., September, 2002Rev., February, 2004
Rev., July, 2004
THRU-TUBING ACCESSORY TOOLS
Baker Oil Tools
HYDRAULIC TUBING PUNCHallowing axial pull on the tool to be used to Product Family No. H13341withdraw the penetrator from the tubing.DESCRIPTION/APPLICATIONAn emergency release sub has been de-signed to allow retrieval of the tool should The Hydraulic Tubing Punch is used to the punch not be able to fully penetrate the punch a communication hole into tubingtubing. Without this feature, failure to fully using only hydraulic pressure.stroke the tool could cause retrieval failure. The Hydraulic Tubing Punch is used in tub-FEATURES/BENEFITSing perforating applications where explo-sives or chemicals are not desired. The •Positive tubing perforation using avail-Hydraulic Tubing Punch will create one able hydraulic pressurehole in the tubing when activated. It is rec-•Avoids need for explosive or chemical ommended to run the tool directly below the perforationHydraulic Tubing Anchor (Product Family •Controlled perforation for communication No. H13226) to ensure punching stability. with formation zones outside tubingHydraulic pressure has to be applied to ac-•Surface pressure indication of successful tivate the tool. The Hydraulic Tubing Punch perforationuses two pistons to apply a force to a pen-•Easy extraction of penetrator in prepara-etrator. Once the tubing has been punched, tion for next penetrationpressure will bleed off while dogs release, •Emergency release mechanism in case of jammed or partial penetrationSPECIFICATION GUIDEToolLengthLength OD(Cocked)(Stroked)TubingStandardin.mmin.mmin.mmSizeConnectionHydraulic Tubing Punch1.7544.542.571081.350.421280.72-3/8\"1\" AMMT BoxProduct Family No. H13341161
PRODUCTSTHRU AND-T AUBINGPPLICATIONS FISHING
因篇幅问题不能全部显示，请点此查看更多更全内容